Menu screen for setting time code and user’s bit.
TC/UB Menu
This item cannot be selected in the Media mode, or during recording.
TC Mode
For configuring the TC mode settings.
NTP:
Activates NTP synchronization of the time code and superimposing of TC information (metadata) on the streaming data. This option is selectable when the [TC GEN] selection switch is set to F-RUN. When “NTP” is selected, the unit will operate in the F-RUN mode regardless of the position of the [TC GEN] selection switch.
GPS 
:
Uses the GPS clock (UTC). The unit will operate in the F-RUN mode if GPS clock data cannot be acquired.
SW Set:
Follows the settings of the [TC GEN] switch.
Clock:
This is set to “Clock” when the [TC GEN] switch is set to “F-RUN”.
[Setting Values: NTP, GPS, 
SW Set, Clock]
[Setting Values: NTP, SW Set, Clock] 
Memo
When the [TC GEN] selection switch is set to “R-RUN” or “REGEN”, or during “Interval Rec”, “Frame Rec” and “High-Speed”, the setting is fixed at “SW Set”.
[TC/UB] cannot be changed during live streaming when “NTP” is selected.
Time Zone
For configuring the time zone.
Local Time:
Time code with time zone corrected for time information obtained from NTP
UTC:
Time code without time zone correction
[Setting Values: Local Time, UTC]
Memo
This item can be configured when [TC Mode] is set to “NTP”.
Streaming Format
For configuring the time code system.
[Setting Values: LTC, VITC]
Memo
This item can be configured when [TC Mode] is set to “NTP”.
This is fixed at “VITC” when [Live Streaming] 
[Optional Adapter] is set to “Enable”.
TC Preset
For setting the time code (hour, minute, second, frame).
Display:
Drop setting 02:02:25.20
Display:
Non Drop setting 02:02:25:20
Memo
When the [TC GEN] switch is set to “REGEN”, “<Regen>” is displayed and preset is disabled.
When [TC Mode] is set to “Clock”, “<Clock>” is displayed and preset is disabled.
UB Mode
For setting the recording mode of the user’s bit.
Date:
Records the date.
Time:
Records the time.
Preset:
Records according to the preset setting.
[Setting Values: Date, Time, Preset]
Memo
If [UB Mode] is set to “Time”, the user’s bit operates in the 24-hour format even if the LCD display is in the 12-hour format.
Preset
For setting the user’s bit. (Digit by digit)
Display:
AB CD EF 01
Memo
When [UB Mode] is set to “Date” or “Time”, this item appears as “---” and preset is disabled.
When the [TC GEN] switch is set to “REGEN”, “<Regen>” is displayed and preset is disabled.
Drop Frame
For setting the framing mode of the time code generator.
Non Drop:
Internal time code generator works in the non-drop-frame mode. Use this setting when placing emphasis on the number of frames.
Drop:
Internal time code generator works in the drop-frame mode. Use this setting when placing emphasis on the recording time.
[Setting Values: Non Drop, Drop]
Memo
This item can be configured only when [System] [Record Set] [Record Format] [ 
Frame Rate] is set to “60p”, “30p”, or “60i”. When [Frame Rate] is “24p”, “Non Drop” becomes fixed and cannot be selected.
When [Frame Rate] is “50p”, “25p”, or “50i”, this item appears as “---” and cannot be selected.
Frame Rate
