For setting whether to add color to the contour of the focused image upon switching the image to black-and-white.
Shooting Assist Item
Focus Assist
[Setting Values: On, 
Off]
Type
For configuring the behavior when operating the user button that is assigned with the [Focus Assist] function.
ACCU-Focus:
Enables the Focus Assist and ACCU-Focus (forced focus) functions. The depth of field of the object becomes shallower to enable easier focusing. The ACCU-Focus function switches automatically to “Off” after about 10 seconds.
Normal:
Enables only the Focus Assist function. The focused area is displayed in color to enable easier focusing. Display color can be specified with [Color].
[Setting Values: ACCU-Focus, Normal]
Color
For setting the display color of the focused area when Focus Assist is activated.
[Setting Values: Blue, Green, Red]
Zebra
For selecting whether the number of zebra patterns to display at the bright areas of the subject.
2 Patterns:
Displays two types of zebra patterns (Zebra1 and Zebra2).
1 Pattern:
Displays one type of zebra pattern (Zebra1).
[Setting Values: 2 Patterns, 1 Pattern]
Detect
For configuring the timing to detect the zebra pattern display.
Converted ITU709:
Performs detection after converting to the ITU709 color space.
HLG/J-Log1:
Performs detection before converting to the ITU709 color space.
[Setting Values: Converted ITU709, HLG/J-Log1]
Memo
This item is selectable only when [Color Space] is set to “J-Log1” or “HLG” and [Convert to ITU709] is set to “Cam” or “Cam + Return”.
Top 1
For setting the maximum luminance level to display Zebra1.
[Setting Values: Over, 100%, 98%, 95% to 5% (in 5% increments)] ( 80%)
Bottom 1
For setting the minimum luminance level to display Zebra1.
[Setting Values: 100%, 98%, 95% to 0% (in 5% increments)] ( 70%)
Top 2
For setting the maximum luminance level to display Zebra2.
[Setting Values: Over, 100%, 98%, 95% to 5% (in 5% increments)] ( Over)
Memo
This item cannot be selected when [Zebra] is set to “1 Pattern”.
Bottom 2
For setting the minimum luminance level to display Zebra2.
[Setting Values: 100%, 98%, 95% to 0% (in 5% increments)] ( 80%)
Memo
This item cannot be selected when [Zebra] is set to “1 Pattern”.
Peaking Frequency
For configuring the frequency band for applying outline enhancement using [LCD Peaking] and the [PEAKING] adjustment knob on the viewfinder.
[Setting Values: High, Middle, Low]
Video Signal Monitor
For configuring whether to display or hide the video signal monitor.
[Setting Values: On, Off]
Memo
This may not be selectable depending on the operating mode and status.
Type
For configuring the video signal monitor to be displayed.
Histogram:
Displays the distribution of points in the image based on the degree of brightness and the corresponding number of points.
Vector Scope:
Displays the saturation and hue of the video as a circle.
Waveform:
Displays the luminance signal of the video as a waveform.
[Setting Values: Histogram, Vector Scope, Waveform]
Histogram Top
For selecting the maximum brightness limit for changing the histogram display color.
[Setting Values: 5% to 110% (in 5% increments)] ( 80%)
When [Color Space] is set to “J-Log1”
[Setting Values: -5F-stop, -4F-stop, -3F-stop(2%), -2F-stop, -1F-stop, 0F-stop(18%), ⅓F-stop, ⅔F-stop, 1F-stop, 1⅓F-stop, 1⅔F-stop, 2F-stop, 2 ⅓ F-stop(90%), 2 ⅔ F-stop, 3F-stop, 3 ⅓ F-stop, 3 ⅔ F-stop, 4F-stop, 4 ⅓ F-stop, 4 ⅔ F-stop, 5F-stop, 5 ⅓ F-stop, 5½F-stop]
Memo
When [Color Space] is set to “J-Log1”, a green line appears which corresponds to the “0F-stop(18%)” portion of the subject with 18% reflectance.
Histogram Bottom
For selecting the minimum brightness limit for changing the histogram display color.
[Setting Values: 0% to 105% (in 5% increments)] ( 20%)
When [Color Space] is set to “J-Log1”
[Setting Values: -6F-stop, -5F-stop, -4F-stop, -3F-stop(2%), -2F-stop, -1F-stop, 0F-stop(18%), ⅓ F-stop, ⅔ F-stop, 1F-stop, 1 ⅓ F-stop, 1 ⅔ F-stop, 2F-stop, 2 ⅓ F-stop(90%), 2 ⅔ F-stop, 3F-stop, 3 ⅓ F-stop, 3 ⅔ F-stop, 4F-stop, 4 ⅓ F-stop, 4 ⅔ F-stop, 5F-stop, 5 ⅓ F-stop]
Memo
When [Color Space] is set to “J-Log1”, a green line appears which corresponds to the “0F-stop(18%)” portion of the subject with 18% reflectance.
