Starts live distribution when “On” is selected.
Live Streaming Item
Live Streaming
[Setting Values: On, 
Off]
Memo
“On” cannot be selected if streaming is not possible with the selected resolution, frame rate and bitrate combination.
“On” cannot be selected if connection of the selected network is not established.
“On” cannot be selected when FTP is running.
Live streaming switches to “Off” when the power is turned off.
Auto Restart
When the network is reconnected after disconnection, live streaming will resume automatically.
On:
Once the network is reconnected, live streaming resumes automatically.
Off:
Live streaming does not resume automatically even when the network is reconnected.
[Setting Values: On, Off]
Memo
When the power of the camera is turned off, regardless of the settings in [Auto Restart], live streaming does not begin automatically even when power is turned on again and network connection is established.
The setting cannot be changed during live streaming (when live streaming is configured to “On”).
Optional Adapter
H.265/HEVC streaming is possible with the use of KA-EN200 (sold separately).
Configure to “Enable”, followed by configuring the streaming server after rebooting.
[Setting Values: Enable, Disable]
Server
For selecting the server for live streaming.
[Setting Values: Server1, Server2, Server3, Server4]
Memo
The setting cannot be changed during live streaming (when [Live Streaming] set to “On”).
Streaming Server
For setting the server for live streaming.
Memo
The setting cannot be changed during live streaming (when [Live Streaming] set to “On”).
Server1, Server2, Server3, Server4
The name that is set in [Alias] is displayed individually.
Alias
For setting a name to distinguish the settings of this camera.
The name set in this item will be displayed in the [Server] options.
The default value is “Server1/Server2/Server3/Server4”.
You can enter up to 31 characters and ASCII characters.
Type
For configuring the system for transferring video and audio to be distributed.
[Setting Values: MPEG2-TS/UDP, MPEG2-TS/TCP, MPEG2-TS/RTP, RTSP/RTP, ZIXI(SRT), RTMP, RTMPS, Facebook Live, YouTube Live] 
[Setting Values: MPEG2-TS/UDP, MPEG2-TS/TCP, MPEG2-TS/RTP, RTSP/RTP, SRT, RTMP, RTMPS, Facebook Live, YouTube Live] 
Memo
Use reception devices that are compatible with the respective transfer systems.
To use the “ZIXI” setting, a dedicated server is needed separately.
The GY-HC550 is a model that is equipped with the Zixi protocol, thus SRT protocol update needs to be performed before using the SRT protocol. Doing so will make the Zixi protocol unusable.
To enable the use of the Zixi protocol again, perform Zixi protocol update.
The following items that can be set vary depending on the setting of this item.
Connection Mode
For configuring the SRT connection mode.
[Setting Values: Caller, Listener, Rendezvous]
Memo
This item is selectable only when [Type] is set to “SRT”.
Destination Address
For setting details such as the host name and the IP address of the live distribution destination.
Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.].
Destination URL
For entering the URL of the live distribution destination beginning with “rtmp://” or “rtmps://”.
There is no default value (blank).
You can enter up to 191 characters and ASCII characters.
Memo
Available when [Type] is set to “RTMP” or “RTMPS”.
Destination Port
Enter the network port number of the live distribution destination using an integer between 1 and 65535.
When [Type] is set to “MPEG2-TS/UDP”, “MPEG2-TS/TCP” or “MPEG2-TS/RTP”, the default value is “6504”. If “ZIXI” is set, the default value is “2088”.
Memo
When [Type] is set to “MPEG2-TS/RTP”, only even numbers from 2 to 65530 can be specified for the port number.
When [Type] is set to “MPEG2-TS/RTP” and [SMPTE 2022-1 FEC] is set to “On”, N+2 and N+4 port numbers are also used in addition to the specified port number (N).
Port
Enter a SRT port number using an integer between 1 and 65535.
The default value is “6504”.
Memo
This item is selectable only when [Type] is set to “SRT”.
Stream ID
For setting the registered stream ID of the live distribution destination. It allows direct streaming of multiple cameras on a single device.
The default value varies with the product model.
Enter not more than 63 characters.
Memo
Available when [Type] is set to “ZIXI” or “SRT”.
Stream Key
Enter the stream key specified at the live transmission destination.
There is no default value (blank).
Enter not more than 127 characters.
Memo
Available when [Type] is set to “RTMP” or “RTMPS”.
Username
For setting the user name.
The default value is “jvc”.
Enter not more than 31 characters.
Memo
This item is selectable only when [Type] is set to “RTSP/RTP”.
Password
For setting the [Stream ID] password.
For ZIXI, there is no default value (blank).
For RTSP/RTP, a random alphanumeric value that varies with each model is assigned as the default value.
Enter not more than 127 characters. Enter not more than 31 characters for RTSP/RTP setting.
Latency
For setting the latency mode.
[Setting Values: High, Medium, Low, Min]
Memo
This item is selectable only when [Type] is set to “ZIXI”.
PCR Mode
For configuring the low latency mode.
[Setting Values: Fast, Standard]
Memo
Available when [Type] is set to “MPEG2-TS/UDP”, “MPEG2-TS/RTP”, “ZIXI” or “SRT”.
Configuring to “Fast” minimizes the lag but the video image may be disrupted depending on the shooting and network conditions as priority is given to low latency. It is intended for use in a stable network environment to prevent packet loss from occurring.
Adaptive Bit Rate
If “On” is selected, the bit rate setting value of live streaming is set to maximum limit, and the bit rate is changed automatically according to changes in the network bandwidth.
[Setting Values: On, Off]
Memo
[Adaptive Bit Rate] can be configured when [Type] is configured to “ZIXI” or “SRT”.
The bit rate is displayed on the status screen only when “On” is set.
SMPTE 2022-1 FEC
Set to “On” to use FEC (Forward Error Correction).
A transmission system that recovers the missing packets in the decoding process without having to retransmit the missing packets.
[Setting Values: On, Off]
The decoder must be compatible with SMPTE 2022-1.
Memo
This item is selectable only when [Type] is set to “MPEG2-TS/RTP”.
FEC Matrix
For setting the amount of FEC (Forward Error Correction) overhead for configuring SMPTE2022-1.
Memo
This item is selectable only when [SMPTE 2022-1 FEC] is set to “On”.
Bandwidth Overhead
Enter the SRT bandwidth overhead using an integer between 5% and 100%.
The default value is “25%”.
Memo
This item is selectable only when [Type] is set to “SRT”.
Latency
Enter the amount of SRT latency using an integer between 20 ms and 8000 ms.
The default value is “500ms”.
Memo
This item is selectable only when [Type] is set to “SRT”.
Encryption
For configuring the SRT encryption mode.
[Setting Values: AES-256, AES-192, AES-128, Off]
Memo
This item is selectable only when [Type] is set to “SRT”.
Passphrase
For configuring the SRT passphrase.
You can enter a passphrase between 10 to 79 characters. The default passphrase is generated randomly.
Memo
This item is selectable only when [Type] is set to “SRT”.
The passphrase can be configured when [Encryption] is configured to a setting other than “Off”.
FEC
For configuring the FEC mode.
It enables recovery of data streaming packet loss without retransmission.
[Setting Values: 6x6, 8x8, 10x10, Off]
Memo
This item is selectable only when [Type] is set to “SRT”.
Post
For selecting Facebook Live Timeline or a page name to upload a post.
Title
For configuring the YouTube Live title.
Schedule
For configuring the date/time to start YouTube Live streaming to ON/OFF.
Select “On” to enable “Settings”.
[Setting Values: On, Off]
Settings
For configuring the date/time to start YouTube Live streaming.
Privacy
For configuring the privacy settings of Facebook Live.
[Setting Values: Public, Friends, Only Me]
Visibility
For configuring the privacy settings of YouTube Live.
[Setting Values: Private, Unlisted, Public]
Resolution
For setting the resolution of the video image during live distribution.
The available options vary according to the settings for [ 
Resolution] and [ Frame Rate] under [Record Format].
|
|
Setting Value |
|---|---|
|
1920x1080 |
1920x1080, 1280x720, |
|
1280x720 |
1280x720, 640x360, |
|
720x480 (U model) |
720x480 |
|
720x576 (E model) |
720x576 |
Memo
The setting cannot be changed during live streaming (when [Live Streaming] set to “On”).
Cropping Position
For configuring the position to crop the image from the camera in the case of vertical streaming resolution for SNS streaming.
[Setting Values: Left End, Left, Center, Right, Right End]
Memo
This feature is available when [Type] is configured to “RTMP”, “RTMPS”, “Facebook Live” or “YouTube Live”, and [Resolution] is configured to “606x1080”, “1080x1080”, “404x720” or “720x720”.
Frame Rate
For setting the frame rate of the video image during live distribution.
The options vary according to the settings of [Live Streaming Set] 
[Resolution] and the [ Frame Rate] settings under [Record Format].
|
|
Setting Value |
|---|---|
|
60p, 60i |
60p, 60i, 30p |
|
50p, 50i |
50p, 50i, 25p |
|
30p |
30p |
|
25p |
25p |
Memo
The setting cannot be changed during live streaming (when live streaming is configured to “On”).
Bit Rate
For setting the encode bitrate of the video image during live distribution.
The selectable options vary according to the settings in [Live Streaming Set] [Resolution] and [Bit Rate].
For details on the settings, please refer to Distributable [Record Format] and [Live Streaming Set] Combinations .
Memo
The setting cannot be changed during live streaming (when [Live Streaming] set to “On”).
Depending on the type of network adapter used and the connection, images and audio sound during live streaming may be choppy.
Interlace Format
For configuring the interlace mode.
Configure the setting according to the decoder in use.
[Setting Values: Field, Field Pair]
Log In
Displays the Facebook login wizard screen.
Log Out
Logs out from Facebook.
Log In
Displays the YouTube login wizard screen.
Log Out
Logs out from YouTube.
