White Balance Item

Preset Temp.

For setting the color temperature when the [WHT BAL] switch is set to “PRESET”.

For details, refer to “Adjusting the White Balance ”.

Alternative Temp.

For setting the alternative color temperature in the Preset mode.

When the [WHT BAL] switch is set to “PRESET”, pressing the [ ] or the user button assigned with the “AWB” function each time switches the color temperature setting in the Preset mode. ([Preset Temp.] [Alternative Temp.])

For details, refer to “Adjusting the White Balance ”.

Preset Paint Memory

For configuring whether to configure the color temperature individually or collectively in the Preset mode. Adjustment is performed in [Preset Paint].

Individual:
Each of the 9 types of color temperatures (2300K, 3000K, 3200K, 4200K, 4800K, 5200K, 5600K, 6500K, 7500K) are configured individually.

Common:
The entire color temperature range is configured collectively.

[Setting Values: Individual, Common]

Preset Paint

For adjusting the R (red) and (B) blue components in the Preset mode.

Increase the number:
Strengthens the red/blue.

Decrease the number:
Weakens the red/blue.

[Setting Values: +32 to -32 ( 0)]

AWB Paint

For adjusting the R (red)/B (blue) component in the AWB (Auto White Balance) mode.

For details, refer to “Adjusting the White Balance ”.

Increase the number:
Strengthens the red/blue.

Decrease the number:
Weakens the red/blue.

[Setting Values: -32 to +32 ( 0)]

Memo

This item is selectable when the [WHT BAL] switch is set to “A” or “B”. When “PRESET” is set, this item appears as “---” and cannot be selected.

Different values can be specified for “A” and “B”.

When [Clear Paint After AWB] is configured to “On”, pressing the [ AWB ] button or the user button assigned with the “AWB” function to readjust the white balance switches the R and B values to “0”.

Clear Paint After AWB

For specifying whether to clear the [AWB Paint] (R value and B value) settings after executing AWB (Auto White Balance).

On:
Sets the [AWB Paint] (R value and B value) settings to “0” after executing AWB (Auto White Balance).

Off:
Does not change the [AWB Paint] (R value and B value) settings after executing AWB (Auto White Balance).

[Setting Values: On, Off]

FAW Paint

For adjusting the R (red)/B (blue) component during FAW (Full Auto White Balance) mode.

Increase the number:
Strengthens the red/blue.

Decrease the number:
Weakens the red/blue.

[Setting Values: -32 to +32 ( 0)]