Taking Videos in Auto Mode

You can record without worrying about the setting details by using the Intelligent Auto mode. Settings such as exposure and focus will be adjusted automatically to suit the shooting conditions.

In case of specific shooting scenes such as person etc., its icon is displayed on the screen.

Before recording an important scene, it is recommended to conduct a trial recording.

Open the LCD monitor.

C2B3_1051_Common_Monitor_Open

Check if the recording mode is MOVIE .

If the mode is PHOTO still image, tap PHOTO on the recording screen to display the mode switching screen.
Tap MOVIE to switch the mode to video.

Check if the recording mode is iA Intelligent Auto.

Tap MENU iA

If the mode is MANUAL_MODE Manual, tap MANUAL_MODE on the recording screen to display the mode switching screen.
Tap iA to switch the recording mode to Intelligent Auto.

Tap Auto&Manua

Press the START/STOP button to start recording.

C2B3_Common StartStop

Press again to stop.

Some displays disappear after approximately 3 seconds.
Use the D-Appear button to change the displays.

After recording, close the lens cover.

Memo

Depending on the subject and shooting conditions, recording may not be performed properly even in the Intelligent Auto mode.

Caution

While this unit may be used with the LCD monitor reversed and closed, the temperature rises more easily. Do not use this unit with the LCD monitor reversed and closed for long periods of time, or in places exposed to direct sunlight or high temperatures.

The power may turn off to protect the circuit if the temperature of this unit rises too much.

Indications for Video Recording

Indications Video Recording (Not NAND)

Display Icon

Description

num_1

Video Quality

Displays the icon of the “VIDEO QUALITY” setting selected in the recording menu.

num_2

TOUCH PRIORITY AE/AF

Displays the setting of “TOUCH PRIORITY AE/AF”.
By default, it is set to “FACE TRACKING”.

num_3

Time

Displays the current time.

num_4

Image Stabilizer

Displays the image stabilizer setting.

num_5

Recording Media

Displays the icon of the media where videos are recorded to.

num_6

Battery Indicator

Displays the approximate remaining battery power during use.

num_7

Recording Mode

Displays the current recording mode of iA (Intelligent Auto) or MANUAL_MODE (Manual).

num_8

Setting Scenes of Intelligent Auto

Displays scenes detected automatically in the Intelligent Auto function. Multiple scenes may be detected.

num_9

Remaining Recording Time

Displays the remaining time for video recording.

num_10

Scene Counter
(Recorded Time)

Displays the elapsed time of the video that is currently being recorded.

Scenes of Intelligent Auto

Display Icon

Description

icon_Iacloseup

Captures one’s skin beautifully.

icon_IaPerson

Allows people to be captured naturally.

icon_IaGroupPhoto

Record a group of people with the most suitable settings.

icon_IaSmileFace

Record the smiling face clearly.

icon_IaMacro

Records while focusing on a near object.

icon_IaLanscape

Focuses at a far distance and captures a sharp image with vivid colors.

icon_IaLowLight

Records in dark places with minimal noise in the overall image.

icon_IaNightView

Allows night scenes to be captured accurately with minimal noise in the overall image.

icon_IaHighLight

Prevents colors from fading even when recording in a bright environment, such as snowfield and beaches.

icon_IaSpotLight

Prevents colors from fading when recording a subject in a spotlight.

icon_IaForest

Reproduces the green color of trees vividly.

icon_IaSunset

Reproduces the colors of sunset naturally.

icon_IaBacklight

Adjusts settings so that the subject does not appear too dark due to backlight.

icon_IaVividColor

Records while emphasizing the brightness of the colors.

icon_IaOutdoor

Reproduces the natural colors of the outdoors during the day.

icon_IaIndoorCool

Reproduces the natural colors of the indoors in a cold-color illumination.

icon_IaIndoorWarm

Reproduces the natural colors of the indoors in a warm-color illumination.

icon_IaHandle

Selects the most suitable settings for handheld shooting.

icon_IaFix

Selects the most suitable settings when a tripod is used for shooting.

Memo

Scenes can be detected according to the shooting conditions and automatically adjusted in Intelligent Auto mode.

Multiple scenes may be detected depending on the recording conditions.

Some functions may not work properly depending on the shooting conditions.

Operation Buttons for Video Recording

Operation buttons for video Recording

Operation Buttons

Description

num_1

Video/Still Image Mode

MOVIE / PHOTO

Switches between video and still image modes.

num_2

T/W Zoom

Allows the same functions as the zoom lever to be performed.
Camera shake that often occurs when using the zoom lever can be minimized.

num_3

Playback Mode

Switches to the playback mode.

num_4 / num_5

Recording Start Rec+Pause
Record-Standby Rec-Start

Functions as the START/STOP button.

num_6

Mark

Mark_icon

By tapping the icon while recording is in progress, you can mark a particular scene to make it easier to find it.

num_7

MENU

Displays the various menus of video recording.

num_8

Display Button D-Appear

Switches the display between full ( D-LOCK ) and simple ( D-Appear ) with every tap of the button.

Simple display: Some displays disappear after approximately 3 seconds.

Full display: Displays everything. The display button changes from D-Appear to D-LOCK .

When the power is turned off, simple display ( D-Appear ) will be set.

num_9

Recording Mode iA / MANUAL_MODE

Switches the recording mode.

Using the Silent Mode

When the Silent mode is used, the LCD monitor darkens and operation sounds will not be output. Use this mode to record quietly in dark places such as during a performance.

SILENT appears when “SILENT MODE” is set to “ON”.

The light is disabled when “SILENT MODE” is set to “ON”.

Operating procedure

Tap “MENU”.

The top menu appears.

Tap “SILENT”.
C3B_TOP_MENU(Wi-Fi)
Tap “ON”.
C3B_SILENT MODE

Useful Settings for Recording

When “QUICK RESTART” is set to “ON”, this unit turns on immediately if you open the LCD monitor within 5 minutes after the power is turned off by closing the monitor.

When “AUTO POWER OFF” is set to “ON”, this unit turns itself off automatically to conserve power when it is not operated for 5 minutes. (only when using the battery pack)

When “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”, this unit detects faces and automatically adjusts its brightness and focus to record the faces more clearly.

When “DATE/TIME RECORDING” is used, the date and time can be recorded together with the video.

Caution

Do not expose the lens to direct sunlight.

Do not use this unit in the rain, snow, or places with high humidity like the bathroom.

Do not use this unit in places subject to excessive humidity or dust, as well as places exposed to steam or smoke directly.

While this unit may be used with the LCD monitor reversed and closed, the temperature rises more easily. Leave the LCD monitor open when using this unit in places exposed to direct sunlight or high temperatures.

The power may turn off to protect the circuit if the temperature of this unit rises too much.

If the temperature of this unit rises during recording, Rec-Start changes color to yellow as a notification.

Do not remove the battery pack, AC adapter, or SD card when the access lamp is lighted. The recorded data may become unreadable.

This unit is a microcomputer-controlled device. Electrostatic discharge, external noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such a case, turn off the power, then remove the AC adapter and battery pack. This unit will be reset.

Disclaimer
- We shall not be held responsible for loss of recorded contents when recording videos/audio or playback cannot be operated due to malfunctions in this unit, provided parts, or SD card.
- Once deleted, recorded contents (data), including data loss due to malfunctions in this unit, cannot be restored. Please be forewarned.
- JVC will not be responsible for any lost data.
- In order for quality improvement, defective recording medium is subject to be analyzed. Therefore, it may not be returned.

Memo

Check the remaining recording time in the media before you start shooting. If there is not enough space, move (copy) the data to a computer or disc.

When there are many files in the media, it may take time for them to be displayed on the playback screen. Wait for a while as the access lamp appears blinking, which indicates normal operation.

Do not forget to make copies after recording!

Recording stops automatically as it cannot be performed for 12 or more consecutive hours according to specifications.
(It may take some time to resume recording.)

For long recordings, the file is split into two or more files if the size exceeds 4 GB.

You can connect this unit to the AC adapter to record for long hours indoors.

Depending on the subject and shooting conditions, recording may not be performed properly even in the Intelligent Auto mode.

Depending on the shooting conditions, the four corners of the screen may appear dark, but this is not a malfunction. In this case, change the shooting conditions by moving the zoom lever, etc.