Registering Access Point Using Wi-Fi Protected Setup (WPS)

Follow the operations below if the access point (wireless LAN router) in use supports WPS.

Tap “MENU”.
(Operation on this camera)

C4B5 Tap MENU

The top menu appears.

Tap the “Wi-Fi” ( Wi-Fi ) icon.
(Operation on this camera)

C3B_TOP_MENU(Wi-Fi)

Tap “Wi-Fi SETTING”.
(Operation on this camera)

C4B9 Wi-Fi MENU1

Tap “ACCESS POINTS”.
(Operation on this camera)

C4B9 WiFi SET ACCESSPOINT

Tap “ADD”.
(Operation on this camera)

C4B9 WiFi ACCESS POINTS ADD

Tap “EZ REGISTRATION WPS”.
(Operation on this camera)

C4B9 WiFi ACCESS POINTS ADD WPS

Activate WPS of the access point (wireless LAN router) within 2 minutes.

To activate WPS, refer to the instruction manual of the device in use.

After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)

WiFi_ACCESS POINTS_ADD_WPS2

Select the access point, then tap “SET”.

C4B9 WiFi ACCESS POINTS ADD2

If several access points are registered, tap on the access point to be used, then tap “USE”.

To delete the access point registered, tap on the access point, then tap “DELETE”.