Perform regular maintenance of this unit to enable it to be used for a long time.
-
-
Maintenance
Maintenance
Caution
Be sure to detach the AC adapter and power plug before performing any maintenance.
Camcorder
Wipe this unit with a dry, soft cloth to remove any dirt.
When it is extremely dirty, soak the cloth in a solution of neutral detergent, wipe the body with it, and then use a clean cloth to remove the detergent.
Caution
Do not use solvents such as benzene, thinner, or alcohol. Doing so may cause damage to the unit.
When using a chemical cloth or cleaner, be sure to observe the warning labels and instructions of the product.
Do not leave the device in contact with rubber or plastic products for a long time.
Lens/LCD Monitor
Use a lens blower (commercially available) to remove any dust, and a cleaning cloth (commercially available) to wipe off any dirt.
Mold may form if the lens is left dirty.
You can use a commercially available anti-reflection or protective film on the screen.
However, depending on the thickness of the film, operations on the touch screen may not be performed smoothly or the screen may darken slightly.
After using underwater or on the beach
For care and cleaning where there is mud or dirt on the camera after using underwater or on the beach, read Before Using Underwater or under Low Temperature .