Copying Selected Files

Select and copy the desired videos or still images individually.

There are 2 ways to select images.

Selecting Files One by One

Specify a “FROM HERE” to “UNTIL HERE” range.

Copying Selected Files One by One

Select video or still image mode.

Tap “SELECT AND CREATE” (video) or “SELECT AND SAVE” (still image).

C5B SELECT AND CREATE

While the video mode is shown in the image, the same operations apply for the still image mode.

Tap MOVIE to switch between the video and still image modes.

Tap the media you would like to make a backup.

C5B SELECT AND CREATE1

Tap on the videos or still images to copy.

C4B5 SELECT FROM SCENES1

CheckMark appears on the selected files.
To remove CheckMark from a file, tap on the file again.

Tap “CHECK” to check the file.
After checking, tap RETURN .

After selecting all the files, tap “SAVE”.

C4B5 SELECT FROM SCENES2

Tap “EXECUTE”.

C5B SELECT FROM SCENES3

The number of discs required to copy the files is displayed.
Prepare the discs accordingly.

Tap “AUTO” or “BY DATE”. ( MOVIE mode only)

SELECT FROM SCENES4

When “AUTO” is selected, videos with similar recording dates are displayed in groups.

When “BY DATE” is selected, videos are displayed according to recording dates.

Tap “EXECUTE”.

C5B SELECT FROM SCENES5

When “INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO EXIT” appears, change the disc.

Tap “OK” when “COMPLETED” is displayed.

SELECT FROM SCENES6

Close the LCD monitor of this unit to turn off this unit and disconnect the USB cable.

Specify the range to copy the files.

Select video or still image mode.

Tap “SELECT AND CREATE” (video) or “SELECT AND SAVE” (still image).

C5B SELECT AND CREATE

While the video mode is shown in the image, the same operations apply for the still image mode.

Tap MOVIE to switch between the video and still image modes.

Tap the media you would like to make a backup.

C5B SELECT AND CREATE1

Tap “RANGE”.

C4B5 SELECT AND SAVE3

Tap the first image (thumbnail) of the range to be copied.

C4B5 SELECT AND SAVE4

CheckMark is added to all the files to be copied when “CHECK” is tapped.

Tap RETURN to return to step 6.

Tap the last image (thumbnail) of the range to be copied.

C4B5 SELECT AND SAVE5

If there are images you don’t want to copy, tap the image (thumbnail) to remove CheckMark .

After selecting all the files, tap “SAVE”.

C4B5 SELECT AND SAVE5

Tap “EXECUTE”.

C5B SELECT FROM SCENES3

The number of discs required to copy the files is displayed.
Prepare the discs accordingly.

Tap “AUTO” or “BY DATE”. ( MOVIE mode only)

SELECT FROM SCENES4

When “AUTO” is selected, videos with similar recording dates are displayed in groups.

When “BY DATE” is selected, videos are displayed according to recording dates.

Tap “EXECUTE”.

C5B SELECT FROM SCENES5

When “INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO EXIT” appears, change the disc.

Tap “OK” when “COMPLETED” is displayed.

SELECT FROM SCENES6

Close the LCD monitor of this unit to turn off this unit and disconnect the USB cable.

Caution

If you copy many images at once, it may not be possible to create the disc halfway through the process. If the volume of the image data is large, copy the data in several times.

Do not turn off the power or remove the USB cable until copying is complete.

Files that are not on the index screen during playback cannot be copied. Special files cannot be copied either.

If the created BD-R/BD-RE is played back on a Blu-ray recorder, your Blu-ray recorder may disable additional recording on the BD-R/BD-RE. In this case, files cannot be added to the disc.

If you stop the process of creating the disc at the screen for creating disc, the disc in use for writing cannot be used again.