> Connecting > Pairing

Pairing

1Check that the indicator is turned off.

2Perform one of the following operations depending on the connection status.

When connecting for the first time

Hold down Maru button for 3 seconds until the indicator flashes alternately in red and blue.

When there are 2 or more the BLUETOOTH devices to connect to

Hold down Maru button for 7 seconds until the indicator flashes alternately in red and blue.

3Turn on the Bluetooth function of the BLUETOOTH device.

4Select “JVC HA-ET103BT” from the device list.

The indicator flashes slowly in blue when a connection is completed.

During the pairing process, the BLUETOOTH device may require input of a PIN code. In such a case, enter “0000” as the PIN code for the System.

If connection (pairing) is not completed within 5 minutes after the indicator starts flashing, the System automatically turns itself off.