> Connecting (Power On) > Reconnect (Power On)
Reconnect (Power On)
1Check that the indicator is turned off.
2Turn on the BLUETOOTH setting of the BLUETOOTH device, press and hold on the System until the indicator lights up in blue for 1 second.
Release your finger after the indicator of the System lights up in blue.
The System then automatically attempts to reconnect the BLUETOOTH device used previously. If connection is established, the indicator continues to flash slowly in blue.
When the indicator keeps flashing slowly in red, connection between the System and the BLUETOOTH device is not established. In this case, select the System on the BLUETOOTH device to connect.
When is pressed for about 5 seconds or more while the power is turned off, the indicator flashes red and blue alternately and the System enters into connection mode. In this case, select this System at the BLUETOOTH device to establish connection.