> Connecting (Power On) > Reconnect (Power On)

Reconnect (Power On)

1Check that the indicator is turned off.

Lights_out_S75N_Z76N + Lights_out_S75N_Z76N

Light out

2Turn on the BLUETOOTH setting of the BLUETOOTH device, press and hold the Power button on the System until the indicator lights up for 1 second.

Release your finger after the indicator lights up.

power_on_off_S75N_Z76N

The System then automatically attempts to reconnect the BLUETOOTH device used previously. After connection is established, the indicator starts to flash slowly.

If the indicator flashes twice repeatedly, this means the System and BLUETOOTH device are not connected to each other. In this case, select the System on the BLUETOOTH device to connect.

When Power button is pressed for about 5 seconds or more while the power is turned off, the indicator flashes quickly and the System enters into connection mode. In this case, select the System at the BLUETOOTH device to establish connection.