Connecting this Unit and a Computer

This unit enables you to connect to a PC with a built-in Bluetooth feature for listening to music or the audio of videos or meetings.

Connection cannot be established if the “Bluetooth” menu is not displayed on the “Device Settings Screen” as shown in the steps below.

  1. Disconnect from other devices

    2. If this unit is already connected via Bluetooth with other devices such as smartphone, turn off the Bluetooth feature for the said device in advance.

  2. Connect this unit and a computer

Pairing this Unit and a Computer for the First Time (Registering a Device)

Remove both earphones from the charging case. The indicator on one of the earphones will flash twice every 5 seconds repeatedly. The indicator on the other earphone starts to flash quickly and repeatedly, and a voice message saying “Pairing” can be heard.

Perform the steps below for each OS of the PC in use.

Windows 10

  1. Right-click the [Start] button

    2. PCCS_PC_connection_Win10_001

  2. Click [Settings]

    3. PCCS_PC_connection_Win10_002

  3. Click [Devices] in the “Windows Settings” screen

    4. PCCS_PC_connection_Win10_003

  4. Click [Add Bluetooth or other device] in the “Bluetooth & other devices” screen

    5. PCCS_PC_connection_Win10_004

  5. Select [Bluetooth] in the “Add a device” screen

    6. PCCS_PC_connection_Win10_005

  6. Once [JVC HA-XXXX] (model number of the unit in use), select it

    7. PCCS_PC_connection_Win10_006_JVC

NOTE

You will see the model number of the unit in use displayed in the “JVC HA-XXXX” area.

The screenshot is intended for illustration purposes. The display may vary depending on the PC in use.

Windows 11

  1. Right-click the [Start] button

    2. PCCS_PC_connection_Win11_001

  2. Click [Settings]

    3. PCCS_PC_connection_Win11_002

  3. Click [Bluetooth & devices] in the “Settings” screen

    4. PCCS_PC_connection_Win11_003

  4. Set “Bluetooth” to [On]

    5. PCCS_PC_connection_Win11_004

  5. Click [Add device]

    6. PCCS_PC_connection_Win11_005

  6. Select [Bluetooth] in the “Add a device” screen

    7. PCCS_PC_connection_Win11_006

  7. Once [JVC HA-XXXX] (model number of the unit in use), select it

    8. PCCS_PC_connection_Win11_007_JVC

NOTE

You will see the model number of the unit in use displayed in the “JVC HA-XXXX” area.

The screenshot is intended for illustration purposes. The display may vary depending on the PC in use.

macOS

  1. Go to the Apple Menu and click [System Preferences]

    2. PCCS_PC_connection_Mac_001

  2. Click [Bluetooth] in the “System Preferences” screen

    3. PCCS_PC_connection_Mac_002

  3. Once [JVC HA-XXXX] (model number of the unit in use) appears in the “Devices” list, select it

    4. PCCS_PC_connection_Mac_003_JVC

NOTE

You will see the model number of the unit in use displayed in the “JVC HA-XXXX” area.

The screenshot is intended for illustration purposes. The display may vary depending on the PC in use.

Reconnecting with a Previously-connected PC

Turn on the Bluetooth setting on the PC to be connected, followed by removing both earphones from the charging case. This earphones will automatically power on and reconnect with the PC that was previously connected.

Top of page