Thumbnail Screen

“Standard Screen” and “Detailed Screen” are available.
Use the [DISPLAY] button to switch between the screens.

Thumbnails are displayed in order of recording from the oldest to most recent.

Standard screen

Thumbnail_01_360

SD Card Information

Displays the status of the inserted SD card, selected SD card, write-protect switch, and the need for restoring.

Use the [SLOT A/B] switch to switch slots. Clips in slot A and B cannot be displayed at the same time.

SlotA_B Lock :

Write-protect switch of the SD card in slot A is set.

SlotB_! :

SD card in slot B needs to be restored or formatted, or is an unsupported SD card.

Clip Mark

Displays the clip information (properties).

Clip_Mark_01
OK Mark

Clip is appended with OK mark.

Memo

Clips appended with OK marks cannot be deleted on the camera recorder.

When [Main Menu]  arrowR  [System]  arrowR  [Record Set]  arrowR  [Record Format]  arrowR  [Format] is set to “AVCHD”, the OK mark indicates that the clip is protected.

Continued From Mark

This mark indicates that the current clip is continued from another SD card when recording is divided and made on several SD cards.

Uneditable Mark

This mark indicates that an OK mark cannot be appended to or deleted from the clip, and the clip cannot be deleted.

When [Main Menu] arrowR [System] arrowR [Record Set] arrowR [Record Format] arrowR [Format] is set to “AVCHD”, clips that are not recorded on this camera recorder cannot be edited.

Continue Mark

This mark indicates that recording of the current clip is continued to another SD card when recording is divided and made on several SD cards.

Check Mark

A green check mark is displayed when the clip is selected.

Magenta and gray check marks are displayed in multiple selection mode.

Cursor

Clip to be worked on. Use the cross-shaped button ( U_botton D_botton L_botton R_botton ) to move the cursor.

Thumbnail Substitution Display

Samneil_BrokenFiile
A clip with corrupted management information. It cannot be played back even if you press the Set (Play) button.
A clip that cannot be played back nor displayed in thumbnail with the current video format settings.
It cannot be played back even if you press the Set (Play) button.
Memo

Depends on the [Main Menu]  arrowR  [System]  arrowR [Record Set]  arrowR  [Record Format]  arrowR  [System], [Resolution] and [Frame & Bit Rate] settings.

When [Record Format] arrowR [Format] is set to “AVCHD”, you may not be able to play back files recorded on a camera recorder other than the JY-HM360 series.
If a file cannot be played back, the above thumbnail substitution display circle_2 is displayed.

Clip Name

The file name (clip number) of the selected clip is displayed.

Operation Guide

Displays a guide for the current operation buttons.

The action selection screen is displayed when the User 3 ([LOLUX/3]) button is pressed.

Recording Start Time

Displays the recording start time of the clip.

Memo

The date/time display is dependent on the [LCD/VF] arrowR [Display Settings] arrowR [Date Style]/[Time Style] settings in the [Main Menu] screen.

Scroll Bar

Indicates the scroll position.

Black space below the scroll bar (white) indicates that there are more pages.

When the scroll bar (white) is at the bottom, this indicates the last page.

Remaining Battery Power

Number of Clips

If none of the clips are selected, the “running number/total number of clips” of the clip to be displayed appears.

Even if only one clip is selected, the number of selected clips in the current slot is displayed.

Detailed screen

Items that are common with the Standard screen will not be described. Refer to “Standard screen ”.

Thumbnail_03_660_620

Thumbnail

Thumbnail of the clip selected by the cursor. Use the cross-shaped button ( L_botton R_botton ) to move the cursor.

Scroll Mark ( L_button_W R_button_W )

If there are previous clips, L_button_W appears on the left.

If there are more clips, R_button_W appears on the right.

The marks will not be displayed if there are no clips before and after the current clip.

Metadata

Metadata of the clip pointed by the cursor.
You can use the cross-shaped button ( U_botton D_botton ) to scroll.