Menu screen for specifying operation settings during shooting.
This item can only be selected in the Camera mode.
Bars
For setting whether to output color bars.
[Setting Values: On, Off]
The audio test signals (1 kHz) can be output simultaneously with the color bar output.
OIS
For setting whether to enable image stabilizer. When “On” is selected, set the Level.
[Setting Values: On, Off]
Level
For setting the level of the image stabilizer.
[Setting Values: High, Normal]
The icon changes according to the level set.
When “High” is selected, correcting severe camera shake may cause the area surrounding the image to darken.
Flicker Correction
For setting whether to adjust image flicker that occurs under a fluorescent light.
[Setting Values: On, Off]
Shutter
For specifying shutter-related settings.
Set to “Step” (fixed value) or “Variable” when operating with the / volume buttons on the side of the camera recorder.
Variable:
Sets to variable scan. Use this setting when shooting a PC monitor.
Step:
Sets to step shutter, which switches the shutter speed by a fixed value.
[Setting Values: Variable, Step]
AE Speed
For setting the convergence speed during AE (Auto Exposure).
[Setting Values: Fast, Middle, Slow]
AGC Limit
For setting the maximum gain value of “AGC”, which electrically boosts the sensitivity level according to the brightness automatically.
[Setting Values: 24dB, 18dB, 15dB, 12dB, 6dB]
Auto Iris Limit (OPEN)
For setting the limit value of the OPEN end when auto iris is enabled.
[Setting Values: F4, F2.8, F2, F1.8, F1.6, F1.4, F1.2]
Auto Iris Limit (CLOSE)
For setting the limit value of the CLOSE end when auto iris is enabled.
[Setting Values: F11, F8, F5.6, F4]
EEI Limit
For setting the shutter speed control range when the Automatic Shutter mode (EEI) is enabled.
[Setting Values: 4F-stop, 3F-stop, 2F-stop]
Smooth Trans
For setting the shock reduction function, which slows down the sudden change when switching with the [GAIN] or [WHT.BAL B/A/PRST] switch.
[Setting Values: Fast, Middle, Slow, Off]
This function is disabled when AGC is operating.
FAW
For setting the position in the white balance switch [WHT.BAL B/A/PRST] to assign the FAW (Full Auto White Balance) function.
[Setting Values: B, A, PRST, None]
GAIN L, GAIN M, GAIN H
For setting the gain value of each position on the [GAIN] selection switch.
The setting is fixed at “AGC” in the Full Auto mode. In addition, the sensitivity setting in Lolux is used.
[Setting Values: AGC, 24dB, 21dB, 18dB, 15dB, 12dB, 9dB, 6dB, 3dB, 0dB]
(Default values GAIN L: 0dB, GAIN M: 6dB, GAIN H: 12dB)
Dynamic Zoom
For setting whether to enable the dynamic zoom function.
Off:
Enables only the optical zoom (1x to 12x).
On:
Enables the dynamic zoom (12x to 24x) in addition to the optical zoom.
[Setting Values: Off, On]
When [System] is set to “4K”, this item is fixed at “Off” and cannot be selected.
Handle Zoom Speed L/Handle Zoom Speed M/Handle Zoom Speed H
For setting the zoom speed for each position on the [ZOOM L/M/H] zoom speed selection switch.
The larger the value the faster the zoom speed. Selecting “Off” disables the zoom operation on the handle.
[Setting Values: Off, 1 to 7]
(Default Values Handle Zoom Speed L: 1, Handle Zoom Speed M: 4, Handle Zoom Speed H: 7)
Zoom Ring
For assigning the zoom or iris adjustment to the zoom ring.
[Setting Values: Zoom, Iris]
Iris Dial
For assigning the iris, shutter or AE level adjustment to the iris dial.
If “Iris/Shutter/AE Level” is selected, the iris dial that is normally used to adjust the iris will be used to adjust the shutter speed and the AE level when the [SHUTTER] button and [AE LEVEL] button are pressed respectively. After which, the iris dial resumes its iris operation.
[Setting Values: Iris/Shutter/AE Level, AE Level, Shutter, Iris]
Macro Mode
This allows you to zoom and shoot subjects without approaching at near distance by taking closeups in telephoto end.
Tele/Wide:
Macro operation functions in all range. The lens will focus to the nearest movable position at the current zoom position.
Wide:
Macro operation functions at the wide end. The lens will focus to the nearest movable position at the current zoom position.
Off:
Macro operation is turned OFF. The shortest shooting distance is 1.5 m regardless of the zoom position.
[Setting Values: Tele/Wide, Wide, Off]
AF Speed
For setting the AF operation speed.
[Setting Values: Fast, Middle, Slow]
AF Assist
For setting whether to shift the auto focus point when the focus ring is turned during Auto Focus (AF).
Area:
This option allows you to shift the auto focus point to the left, center, right, or near and far directions by turning the focus ring during AF.
Selecting this option displays the icon in the area.
Far/Near:
This option allows you to shift the auto focus point to near and far directions by turning the focus ring during AF.
Off:
Sets the AF Assist function to “Off”.
[Setting Values: Area, Far/Near, Off]
This setting is effective only when the [FOCUS] switch is set to “AUTO”.
The manual focus adjustment mode is temporarily activated by turning the focus ring in the AF mode. If the focus ring is not operated for a certain time, the camera recorder returns to the AF mode.
User Switch Set...
For specifying user button related settings.