LCD/VF Menu

Item for specifying settings related to the LCD monitor or viewfinder screen.

This menu screen can be used to specify settings related to the Focus Assist mode, zebra pattern display, screen size, marker, and safety zone. In addition, it is also used for selecting whether to display characters on the LCD monitor or viewfinder screen, as well as for adjusting the picture quality of the LCD monitor.

Shooting Assist...

Menu for setting the Shooting Assist function.

Shooting Assist Item

Marker Settings...

For setting items such as the safety zone and center mark.

Marker Settings Item

Display Type...

For specifying display-related settings.

Display Type Item

Display On/Off...

For configuring the on/off setting of the screen display.

Display On/Off Item

VF Color

For selecting whether to display the image on the viewfinder screen in color or black-and-white.

Select “On” to display in color, and “Off” to display in black-and-white.

[Setting Values: REC button On, Off]

LCD Contrast

For setting the difference in luminance between the darkest and brightness areas in the LCD monitor.
Increasing the value increases the contrast.

[Setting Values: +10 to +1, REC button 0, -1 to -10]

LCD Bright

For configuring the brightness of the LCD monitor.
Increasing the value increases the brightness.

[Setting Values: +10 to +1, REC button 0, -1 to -10]

LCD Peaking

For adjusting the outline of the image displayed on the LCD monitor.

[Setting Values: +10 to +1, REC button 0, -1 to -10]

Convert to ITU709

When [Color Space] is set to “ITU2020”, “J-Log1” or “HLG”, the video images on the LCD monitor and viewfinder are converted to the ITU709 color space for display.

When [A/V Set] arrowR [Video Set] arrowR [SDI OUT2] is set to “VF”, the [HD/SD SDI OUT2] terminal output is also converted.

When [A/V Set] arrowR [Video Set] arrowR [HDMI OUT] is set to “VF”, the [HDMI] terminal output is also converted.

Cam + Return:
The camera and return videos are converted from the color space configured in [Color Space] to the ITU709 color space.

Cam:
Only the camera video is converted to the ITU709 color space.

Off:
Not converted.

[Setting Values: Cam + Return, Cam, REC button Off]

Memo

This item can be configured only when [Color Space] is set to “ITU2020”, “J-Log1” or “HLG”.

White Level

For configuring the white level during adjustment of the dynamic range that is visible in the LCD monitor or viewfinder when [Color Space] is set to “HLG”.
When [Color Space] is set to “HLG” and [Convert to ITU709] is set to a value other than “Off”, this item can be used to configure the output luminance level (%) of HLG videos that corresponds to 100% on the ITU709 gamma curve during the conversion.

[Setting Values: 80.0%, 77.5%, 75.0%, REC button 72.5%, 70.0%, 67.5%,65.0%, 62.5%, 60.0%, 57.5%, 55.0%, 52.5%, 50.0%]

Memo

This item can be configured only when [Color Space] is set to “HLG”.

The value on the spot meter changes in tandem with this setting.
Example: When [White Level] is set to “75.0%”, the point at which the HLG output is 75% is displayed as 100% on the spot meter.

Refer to Tone Mapping Characteristics for Converting HLG to ITU709 for LCD/VF for each characteristic. Conversion to the ITU709 color space is performed with gamma and knee adjusted such that the maximum HDR dynamic range is visible during the conversion.

LCD RGB Gain

For adjusting the R (red), G (green) and B (blue) gain level of the LCD monitor.

[Setting Values: +127 to REC button 0 to -128]

Reset

Restores [LCD RGB Gain] to the default settings.

VF RGB Gain

For adjusting the R (red), G (green) and B (blue) gain level of the viewfinder.

[Setting Values: +127 to REC button 0 to -128]

Reset

Restores [VF RGB Gain] to the default settings.