Return audio from the network can be played through a headphone.
IFB (Return Audio)
Memo
This feature is only usable in the Camera mode.
Start the encoder before activating Return over IP. To end, turn off Return over IP before shutting down the encoder. When the bit rate or frame rate of the encoder is changed, adjust the camera settings according to the encoder settings, followed by restarting the camera.
This feature is available when [System] 
[Record Set] [Record Format] [System] is set to “HD” or “SD”. When [ 
Frame Rate] is set to “24p”, this feature is not available.
Configuring the Return over IP Server
Configure the Return over IP settings and establish the connection before displaying the return video.
Register the [Return Server].
Configure [Network] [Return over IP] [Server] to “Server”.
Configure the individual settings in the [Return Server] item.
Memo
For details on the registered information, please consult the network administrator for the server.
Configure “Icecast” to [Type].
Operates as IFB when the setting is configured to “Icecast”.
Return Audio from the Network (IFB)
Set the camera recorder to the Camera mode.
Assign the “Return over IP” function to any of the user buttons.
Memo
The “Return over IP” feature can also be operated using “On”/“Off” under [Network] [Return over IP] [Return over IP].
Configure the input destination of the return video to “Network”.
To specify the input destination of the return video, configure [A/V Set] [Video Set] [Return Input] to “Network”.
Memo
When [System] [Record Set] [Record Format] [System] is configured to “HD(SDI In)” or “SD(SDI In)”, “---” is displayed and the setting cannot be configured.
Press the user button that is assigned with the “Return over IP” function.
When Return over IP is activated, the settings in [A/V Set] [Audio Set] [IFB/RET Monitor] will be applied to the audio.
