Camera Function Menu

For setting whether to output color bars.

[Setting Values: On, Off]

For setting whether to enable image stabilizer. When “On” is selected, set the Level.

To turn on the [Hard Lock] function, configure OIS to “Off”.

[Setting Values: On, Off]

For setting the level of the image stabilizer.

[Setting Values: High, Normal]

When the Hard Lock feature is “On”, the IS (image stabilization) lens is locked in place.
Use this feature when blurry image caused by camera shake tends to occur due to strong acceleration.

[Setting Values: On, Off]

For specifying shutter-related settings.

Configure the value to “Step” (fixed value) or “Variable” when operating the shutter with the cross-shaped button ( ) on the side of the camera recorder unit.

[Setting Values: Variable, Step]

For setting the convergence level during AE (Auto Exposure).

This can also be adjusted using the cross-shaped button ( ) on the side of the camera recorder unit.

[Setting Values: -6 to +6 ( 0)]

For setting the convergence speed during AE (Auto Exposure).

[Setting Values: Fast, Middle, Slow]

For configuring the AE detection area.

[Setting Values: Center, Bottom, Normal]

For setting the maximum gain value of “AGC”, which electrically boosts the sensitivity level according to the brightness automatically.

For setting the limit value of the OPEN end when auto iris is enabled.

[Setting Values: F5.6, F4, Open]

For setting the limit value of the CLOSE end when auto iris is enabled.

[Setting Values: F16, F11, F8, F5.6]

For setting the shutter speed control range when the Automatic Shutter mode (EEI) is enabled.

[Setting Values: 4F-stop, 3F-stop, 2F-stop]

For setting the shock reduction function, which slows down the sudden change when switching with the [GAIN] or [WHT BAL] switch.

[Setting Values: Fast, Middle, Slow, Off]

For setting the gain value of each position on the [GAIN] selection switch.

The setting is fixed at “AGC” in the Full Auto mode. In addition, the sensitivity setting in [Lolux] is used.

For specifying zoom settings.

For specifying focus settings.

For specifying face detection settings.

When “On” is selected, an icon appears and the camera recorder switches to the infrared recording mode that is suitable for night recording.

Using infrared illumination allows images to be captured naturally in a pitch-dark environment. It is recommended for observation of animals without alerting them or for natural facial expressions without firing glaring flash light at the subject.

[Setting Values: On, Off]

For specifying user button related settings.

For specifying the settings when the [KEYLOCK] switch is set to “ON”.

[Setting Values: Keylock Except Rec, Keylock All]

For specifying settings on the behavior when accessing the menu using the [MENU/THUMB] button.

[Setting Values: Press and Hold, One Press]

For specifying tagging settings for the camera angle.

[Setting Values: SB, SL, EZ, SL2, EZ2, TV]