VIDEO MAIL

Setting (Once setting is done, start from the “Regular Operation” below)

1Create a QR code.

Memo

Perform operations in step 2 and 3 after creating a QR code, and read the QR code one by one by the camera.

Enter values in the required items for setting the recipient’s e-mail address.

E-mail address: set the recipient’s e-mail address.

E-mail function: set the function of the e-mail that is transmitted to the recipient’s e-mail address.

Up to 8 e-mail addresses can be set.

Start reading from (1) if multiple e-mail addresses are set. Click the number or “<”, “>”.

Input Form

E-mail Address (1)

E-mail Function (1)
E-mail Address (2)

E-mail Function (2)
E-mail Address (3)

E-mail Function (3)
E-mail Address (4)

E-mail Function (4)
E-mail Address (5)

E-mail Function (5)
E-mail Address (6)

E-mail Function (6)
E-mail Address (7)

E-mail Function (7)
E-mail Address (8)

E-mail Function (8)

Enter values in the required items for setting the sender’s e-mail address.

E-mail address: set the sender’s e-mail address.

Input Form

E-mail Address

Enter values in the required items for setting the e-mail server (SMTP server).

SMTP server: set the name of the e-mail server (SMTP server) from which an e-mail account is obtained.

SMTP port number: set according to the condition when the e-mail account is obtained. Normally set to “25”.

SMTP authentication method: set according to the condition when the e-mail account is obtained.

Input Form

E-mail Address
SMTP Server

SMTP Port Number

SMTP Authentication

User name: set if the SMTP authentication method is set to other than “None”. (same as the registered user name (account name) when the e-mail account is obtained)

Input Form

E-mail Address
User Name

Password: set if the SMTP authentication method is set to other than “None”. (same as the registered password when the e-mail account is obtained)

Input Form

Password

2Display the screen for reading the QR code.

Tap “MENU”.
(Operation on this camera)

Tap MENU

The top menu appears.

Tap the “Wi-Fi” ( Wi-Fi ) icon.
(Operation on this camera)

C3B_TOP_MENU(Wi-Fi)

Tap Cursor_Right on the lower right of the screen.
(Operation on this camera)

C3-Wi-Fi_MENU_1

Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)

C3-Wi-Fi_MENU_2

Tap “SET FROM QR CODE”.

C3_WiFi_COMMON-SET_QRCORD

Tap “EXECUTE”.

C3_WiFi_QR_CORD_SET_USERGUIDE

3Read a QR code.

Read a QR code.
(Operation on this camera)

C3_WiFi_COMMON-SET_READ_QRCORD

Tap “YES”.

C3_WiFi QR_CORD VIDEO MAIL

Contents of the screen vary depending on the QR code that is read by this unit.

Tap “OK”.

C3_WiFi_QR_CORD_SETTING_DONE

Tap “NEXT” to return to the screen to read the QR code.

Set contents are saved.

4Registering the access points (wireless LAN router) to this unit

Wi-Fi Protected Setup (WPS) Registration

Tap “MENU”.
(Operation on this camera)

Tap MENU

The top menu appears.

Tap the “Wi-Fi” ( Wi-Fi ) icon.
(Operation on this camera)

C3B_TOP_MENU(Wi-Fi)

Tap Cursor_Right on the lower right of the screen.
(Operation on this camera)

C3-Wi-Fi_MENU_1

Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)

C3-Wi-Fi_MENU_2

Tap “ACCESS POINTS”.
(Operation on this camera)

C3_WiFi COMMON-SET ACCESSPOINT

Tap “ADD”.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD

Tap “EZ REGISTRATION WPS”.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD_WPS

Activate WPS of the access point (wireless LAN router) within 2 minutes.

To activate WPS, refer to the instruction manual of the device in use.

After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)

WiFi_ACCESS POINTS_ADD_WPS2

Search the access point, and select from the list.

Set the name (SSID) of the access point (wireless LAN router) and the password beforehand.

Tap “MENU”.
(Operation on this camera)

Tap MENU

The top menu appears.

Tap the “Wi-Fi” ( Wi-Fi ) icon.
(Operation on this camera)

C3B_TOP_MENU(Wi-Fi)

Tap Cursor_Right on the lower right of the screen.
(Operation on this camera)

C3-Wi-Fi_MENU_1

Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)

C3-Wi-Fi_MENU_2

Tap “ACCESS POINTS”.
(Operation on this camera)

C3_WiFi COMMON-SET ACCESSPOINT

Tap “ADD”.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD

Tap “SEARCH”.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD_S1

The search results appear on the camera’s screen.

Tap the name (SSID) of the desired access point from the list of search results.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD_S2

Register a password.
(Operation on this camera)

C2-WiFi_Passwardx8

Tap on the on-screen keyboard to enter characters. The character changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice, or “C” by tapping 3 times.

Tap “DELETE” to delete a character.

Tap “CANCEL” to exit.

Tap “A/a/1” to select character input type from upper case letter, lower case letter, and number.

Tap LEFT or RIGHT to move one space to the left or right.

The password is not required if the wireless LAN router is not security protected.

After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)

WiFi_ACCESS POINTS_ADD_WPS2

Other methods, such as “Manual Registration” and “WPS PIN Registration” are also available. Refer to the following link for details.

Regular Operation

5Record videos to send a video mail.

Tap “MENU”.

Set the camera to the recording mode.

Tap MENU

The top menu appears.

Tap the “Wi-Fi” ( Wi-Fi ) icon.

C3B_TOP_MENU(Wi-Fi)

Tap “VIDEO MAIL” ( V-MAIL ).

C3-Wi-Fi_MENU_1

Tap “VIDEO MAIL ADDRESS”.

C3_WiFi_V-MAIL

Select “VIDEO MAIL ADDRESS”, then tap RETURN .

C3_WiFi_V-MAIL_ATTN

To display the V-MAIL icon, tap the e-mail address.

To cancel the e-mail address, press the icon one more time.

Up to 8 e-mail addresses can be selected.

Tap “START” ( C2_Stamp-Arrow ).

C3_WiFi_V-MAIL

Press the START/STOP button to start recording.

C2B3_Common StartStop

Or, tap the REC on screen.

Recording starts after the 5-second countdown.

Countdown

You can allow the recording to be performed for 15 seconds or press the START/STOP button to stop.

Tap “SEND”.

C2-WiFi_VIDEO MAIL3

Sending of the video mail starts.

To check the file, tap “PLAY TO CHECK”.

When it is complete, tap “OK”.

6Check the incoming e-mail.