Changing the Settings

To use the Wi-Fi function, it may be necessary to perform some settings on the camera and smartphone (or computer).

Registering the access points to connect (wireless LAN router)

Obtaining a dynamic DNS account

Setting the account on this camera

Setting the sender’s e-mail address

Registering the recipient’s e-mail address

Menu Settings

Setting

Details

DIRECT MONITORING

Configures various settings related to DIRECT MONITORING.

PASSWORD
Sets the password to access the camera.

ENFORCED GROUP OWNER (Default: “ON”)
Set whether or not to get the owner group permissions.
・OFF: Set this if connection to devices that support Wi-Fi Direct fails. (When set to OFF, connection to devices that do not support Wi-Fi Direct will be disabled.)
・ON: It is recommended to set this usually.

HTTP PORT (Default: “80”)
Changes the port number to access to the camera.

INDOOR MONITORING

Configures various settings related to INDOOR MONITORING.

PASSWORD (Default: “0000”)
Selects the password to access the camera.

HTTP PORT (Default: “80”)
Changes the port number to access to the camera.

OUTDOOR MONITORING

Configures various settings related to OUTDOOR MONITORING.

PASSWORD (Default: “0000”)
Selects the password to access the camera.

UPnP (Default: “ON”)
Sets the UPnP of the camera.
・OFF: Disables UPnP.
・ON: Enables UPnP.

DDNS SETTING
Configures various settings related to DDNS.

HTTP PORT (Default: “80”)
Changes the port number to access to the camera.

DETECT/MAIL

Configures various settings related to notification mails.

DETECT/ MAIL ATTN.
Selects the recipient’s e-mail address for Detect/Mail.

MAIL SETTING
Sets the e-mail addresses of the sender and recipient.

DETECTION METHOD (Default: “MOTION DETECTION”)
Sets the detection method to start recording.
・MOTION DETECTION: Starts recording upon detection of subject’s movements.
・FACE DETECTION: Starts recording upon detection of human faces.

DETECTION INTERVAL (Default: “10 minutes”)
Sets the time period to enable detection again after the previous one.

SELF RECORDING (Default: “ON”)
Sets whether to record videos on this camera during detection.
・OFF: Does not record videos on this camera.
・ON: Records videos on this camera.

VIDEO MAIL

VIDEO MAIL ADDRESS
Selects the recipient’s e-mail address for video mails.

MAIL SETTING
Sets the e-mail addresses of the sender and recipient.

TV MONITORING

MAC ADDRESS FILTER (Default: “OFF”)
By setting to “ON”, Everio can be searched from the device (TV monitor); the MAC address of the device needs to be registered to Everio in advance.
・OFF: Disables UPnP.
・ON: Enables UPnP.

MAC ADDRESS LIST
MAC address of the TV monitor can be registered to the camera.

COMMON Wi-Fi SETTING

Configures various settings related to the network.

ACCESS POINTS
Adds, deletes, or perform LAN settings of access points (wireless LAN router).

MAIL SETTING
Sets the e-mail addresses of the sender and recipient.

MAC ADDRESS (Media Access Control address)
Displays the MAC address of the camera.
(The above shows the MAC address when connected to an access point, while the below shows the address during direct connection.)

SET FROM QR CODE
Perform the Wi-Fi setting after the camera reads the QR code generated by following the instruction in Detailed User Guide.

LOCK SETTINGS
Sets a password to prevent others from seeing the network settings.

INITIALIZATION
Returns the network settings to their default values.

EASY STORAGE

Connect to the computer via access point at home using the wireless LAN router, to monitor images captured by the camcorder.