Preparing a USB External Hard Disk Drive

Caution

This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first.

Memo

When connecting to the external hard disk drive, use a USB cable (commercially available) indicated below. The USB cable provided with this unit cannot be used.

Please prepare a USB cable that is suitable for your product. An optional USB conversion cable (QAM1588-001: Mini AB Female - Micro A Male) may be used in conjunction with our optional USB conversion cable (QAM0852-001: A Female - Mini B Male).
*To purchase, consult your nearest JVC service center.

Open the terminal cover.

Connect using the optional AV cable.

Connect the USB cable and the AC adapter of the USB external hard disk drive.

Before making any connection, close the LCD monitor to turn off this unit.

C4B9 HDD Connect3

Connect the USB cable with the USB external hard disk drive.
Connect the AC adapter of the USB external hard disk drive.

Turn on the external hard disk drive.

Refer also to the instruction manual of the external hard disk drive.

Open the LCD monitor.

C4B5 Monitor Open

This unit turns on and the “BACK-UP” menu appears.

While the USB cable is connected, the “BACK-UP” menu is displayed.

Caution

Be sure to turn off the power when connecting the devices.
Otherwise, electric shocks or malfunctions may occur.

Do not connect a USB hub between this unit and the USB external hard disk drive.