Transferring Videos (AVCHD format)

Transfer videos recorded in AVCHD format to the smartphone.

Caution

The video to be forwarded is converted to the following format.

Item	Details
System	MP4
Video	Codec	H. 264/MPEG-4 AVC Baseline Profile
	Resolution * Bit rate is indicated in ( )	640X360 (1Mbps)
	Frame rate	30p
Audio	Coding system	AAC
	Sampling rate	48kHz
	Bit	16 bit
	Number of channels	2 ch

Start “Everio sync. 2” on a smartphone.

Start the application after confirming that the smartphone is connected to this camera.

Select the connection type to the camera.

Tap the current connection type.

Recording screen appears.

Tap “Index”.

In the index screen, tap the desired images to transfer.

Confirm that the “AVCHD” tab is indicated in the lower part of the screen.

Files are displayed as a split files by certain lengths of time. Enter the check mark ( ) to the files to transfer, and tap the transfer mark icon ( ) on the lower right.

Number of the selected image files is indicated next to the check mark in lower left.

To set the length of video you are transferring, refer to the below instructions.

Smartphone Application Settings

Tap “TRANSFER”.

Tap “CANCEL” to cancel the operation.

“TRANSFER” starts.

Tap “CANCEL” to cancel the operation.

After transferring is complete, tap “OK”.

To play back and check the video, tap “CHECK”. (Android only)

To upload the video, tap “SHARE”. (Android only)
Tap the desired service, then proceed to the uploading process.
To make use of a service, it is necessary to perform registration beforehand.

Transferring manually

You can set the length of transferred video.

Tap “MANUAL” in step 5.

At the start point, enter the starting time of the video.
Specify the lengths of the video by using the slider bar. (10 to 300 sec)

After confirming the setting, tap “TRANSFER”, and then tap “TRANSFER” one more time.

Tap “+”“-” to set the start point of the video transfer (minutes/seconds).

Length of the transferred video can be adjusted by using the slider bar.

The longer the length of the transferred video is set, the longer it takes to transfer the video.