> Connecting (Power On) > Reconnect

Reconnect

Turn on the Bluetooth function on the device to connect, followed by taking both earphones from the charging case. The power of the earphones turns on automatically, and they are automatically reconnected with the last connected device.

connecting_A7T_1

If reconnection cannot be established, operate the BLUETOOTH device to connect.

If connection is not established for more than 5 minutes, the power of the earphones automatically turn off.

1Check that the power of the earphones is off. Power Off

2Turn on the BLUETOOTH function of the device to connect, followed by pressing and holding the button on the L and R earphones at the same time for about 3 seconds.

PLAY_button_LR_A7T

[L]

  1. The indicator flashes and the power turns on.

  2. The System then automatically attempts to connect with the last connected device.

  3. After connection is established, the L indicator continues to flash every 5 seconds.

    4. blue_flash_A7T_L

[R]

  1. The indicator flashes and the power turns on.

  2. It will attempt to connect with the L earphone.

  3. After connection is established, the R indicator flashes twice and switches to flash every 5 seconds.

    4. blue_flash_A7T

    The earphones reconnect with the device that was last connected and can now be used for listening to music.

If reconnection cannot be established, operate the BLUETOOTH device to connect.

If the R indicator only flashes twice, this means the L and R earphones are not connected to each other. In this case, turn off the power of both the L and R earphones, followed by turning on their power again at the same time.

Pressing and holding the button of the L earphone for about 5 seconds switches the L indicator light to a quick flash. If this occurs, turn off the power of the earphone and repeat the steps from the beginning. Power Off

If connection is not established for more than 5 minutes, the power of the earphones automatically turn off.