This menu screen allows system-related settings.
System Menu
For specifying recording settings, formatting and restoring of SD card, tally lamp setting, date/time, time zone, and other settings.
It can also be used to reset the menu settings to their default values.
Record Set...
For specifying recorded video-related settings.
Media
Format Media
For formatting (initializing) an SD card.
Select a card slot (A or B), select [Format] from [Cancel]/[Format], and press the Set button ( 
) to format (initialize) the card.
Restore Media
For restoring an SD card.
Select a card slot (A or B), and press the Set button ( ) to restore the SD card.
Memo
This item appears only when the SD card needs to be restored. However, it is not selectable when recording in Camera mode and during Clip Review.
Setup File
This allows you to save the menu settings as well as the performance results of shutter speed and AWB.
It is useful to save settings according to different shooting conditions.
Load File...
Loads the settings.
Store File...
Saves the settings.
Delete File...
Deletes the configured file.
Auto Power Off
For setting whether to turn off the power automatically when the camera recorder is not operated for more than 5 minutes when the battery is used. This function is valid only when the battery is used.
[Setting Values: On, Off]
Memo
When both the battery and AC adapter are connected, power from the AC adapter connection will be used. As such, this function will not have any effect.
Tally Lamp
For setting whether to light up the tally lamp during recording, or when the remaining space warning is displayed.
On:
Turns on the indicator, indicator blinks.
Off:
Turns off the indicator, indicator does not blink.
[Setting Values: On, Off]
Memo
The blinking warning display, such as when the remaining battery level is low, is enabled in a setting other than “Off”.
Reset All
Resets all menu settings.
Memo
Date/Time
For setting the year, month, day, hour, and minute.
Memo
The display order of the date (year, month, day) follows the setting in [Display Settings] 
[Date Style]. However, the 24-hour format is used for the hour display regardless of the [Time Style] setting.
Time Zone
For setting the UTC time difference in units of 30 minutes.
[Setting Values: UTC-12:00-UTC-00:30, UTC, UTC+00:30-UTC+14:00 (in 30 min increments)]
( UTC+05:30)
Memo
If [Date/Time] is already set, the [Date/Time] item is automatically adjusted when [Time Zone] is altered.
Reserved
For setting the additional function to “On” or “Off”.
Reserved 1 to Reserved 16
Normally set to “Off”.
[Setting Values: On, Off]
System Information
Version
Displays information on the firmware version.
Open Source License
Displays the license for the open source software used by this camera recorder.
