Return Video/Audio from the Network (Return over IP)

Return video/audio from the network can be displayed on the viewfinder or LCD monitor of the camera or listened through a headphone.

Memo

This feature is only usable in the Camera mode.

Start the encoder before activating Return over IP. To end, turn off Return over IP before shutting down the encoder. When the bit rate or frame rate of the encoder is changed, adjust the camera settings according to the encoder settings, followed by restarting the camera.

This feature is available when [System] arrowR [Record Set] arrowR [Record Format] arrowR [System] is set to “HD” or “SD”. When [ SlotA_B Frame Rate] is set to “24p”, this feature is not available.

Return over IP...

Configuring the Return over IP Server

Configure the Return over IP settings and establish the connection before displaying the return video.

Register the [Return Server].

Configure [Network] arrowR [Return over IP] arrowR [Server] to “Server”.

Configure the individual settings in the [Return Server] item.

Memo

For details on the registered information, please consult the network administrator for the server.

Configure “Icecast” to a setting other than [Type].
Operates as IFB when the setting is configured to “Icecast”.

Return Video and Audio from the Network

Set the camera recorder to the Camera mode.
Operation Modes
Assign the “Return Video” and “Return over IP” features to any of the user buttons.
Assignment of Functions to User Buttons
Memo

The “Return over IP” feature can also be operated using “On”/“Off” under [Network] arrowR [Return over IP] arrowR [Return over IP].

Configure the input destination of the return video to “Network”.

To specify the input destination of the return video, configure [A/V Set] arrowR [Video Set] arrowR [Return Input] to “Network”.

Return Input
Memo

When [System] arrowR [Record Set] arrowR [Record Format] arrowR [System] is configured to “HD(SDI In)” or “SD(SDI In)”, “---” is displayed and the setting cannot be configured.

Select the aspect ratio of the return video.

Set using [A/V Set] arrowR [Video Set] arrowR [Return Aspect].

Return Aspect
Press the user button that is assigned with the “Return over IP” function.

When Return over IP is activated, the settings in [A/V Set] arrowR [Audio Set] arrowR [IFB/RET Monitor] will be applied to the audio.

IFB/RET Monitor...
Select the way the return video is to be displayed.

Select in [Camera Function] arrowR [User Switch Set] arrowR [Return Video]. The camera will operate according to the setting.

Return Video
Press the user button that is assigned with the “Return Video” function.

By pressing the user button assigned with the “Return Video” function, the captured image or return video is displayed according to the method specified in step Step6 .