-
- Recording
-
Recording at Intervals (TIME-LAPSE RECORDING)
Recording at Intervals (TIME-LAPSE RECORDING)
This function enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval.
This is useful for making observations such as the opening of a flower bud.
Open the LCD monitor.
Check if the recording mode is 
.
If the mode is 
still image, tap on the recording screen to display the mode switching screen.
Tap to switch the mode to video.
Tap “MENU”.
The top menu appears.
Tap “SPECIAL RECORDING”.
Tap “TIME-LAPSE RECORDING”.
Tap 
to exit the menu.
Tap 
to return to the previous screen.
Tap to select a recording interval (1 to 80 seconds).
The greater the number of seconds, the longer the recording interval.
Tap to exit the menu.
Tap to return to the previous screen.
Start recording.
A frame is taken at intervals of the selected period.
When the recording interval is set to “20SEC INTERVAL” or higher, this unit switches to the power-saving mode between recordings.
At the next point to record, the power-saving mode will be turned off and recording will start automatically.
Settings of Time-Lapse recording are not saved when the power is turned off.
Indications During Time-Lapse Recording
Display |
Description |
|
|---|---|---|
|
|
Recording interval |
Displays the recording interval that is set. |
|
|
Recorded Time |
Displays the actual recorded time of the video. Recorded time increases in units of frames. |
|
|
Actual Elapsed Time |
Displays the actual elapsed time after recording starts. |
|
|
Remaining Recording Time |
Remaining time left to record with the currently selected video quality. |
Time-Lapse Setting
The greater the number of seconds, the longer the recording interval.
Setting |
Details |
|---|---|
OFF |
Deactivates the function. |
1SEC INTERVAL |
Takes a frame at 1-second intervals. |
5SEC INTERVAL |
Takes a frame at 5-second intervals. |
20SEC INTERVAL |
Takes a frame at 20-second intervals. |
80SEC INTERVAL |
Takes a frame at 80-second intervals. |
Caution
During the time-lapse recording, video quality is set to XP mode.
Audio cannot be recorded during time-lapse recording.
When recording is stopped with the recorded time less than “0:00:00:17”, the video will not be saved.
Zooming, simultaneous still image recording, and image stabilizer are not available in time-lapse recording.
When Time-Lapse recording is set, you cannot record still images.
Memo
Settings of time-lapse recording are reset when the power is turned off. To start time-lapse recording again, it is necessary to make the selection once more.
Recording stops automatically 99 hours after it is started.
Make use of a tripod and AC adapter for time-lapse recordings with long intervals.
It is also recommended to fix the focus and white balance manually.