-
- Using Wi-Fi
- Changing the Settings
-
Registering Access Point Using WPS PIN
- Wi-Fi Capabilities
- Operating Environment
- Precautions on Using Wi-Fi
- Image Monitoring via Direct Connection (DIRECT MONITORING)
- Recording the Location Information
- Image Monitoring via an Access Point at Home (INDOOR MONITORING)
- Image Monitoring via the Internet (OUTDOOR MONITORING)
- Changing the Settings
- Registering Access Point Using Wi-Fi Protected Setup (WPS)
- Registering Access Point Using WPS PIN
- Checking the MAC Address of this Camera
- Configuring Wi-Fi Connection with LCD Monitor Closed
- Initializing the Wi-Fi Settings
- Using Smartphone Applications
- Troubleshooting
- Wi-Fi Specifications
Registering Access Point Using WPS PIN
Tap “MENU”.
(Operation on this camera)
![C4B5 Tap MENU](fig/C4B5 Tap MENU_CMJNILrvfdxbue.png)
The top menu appears.
Tap the “Wi-Fi” (
) icon.
(Operation on this camera)
![C5B Top Menu(WiFi)](fig/C5B Top Menu(WiFi)_UJDCILympypskr.png)
Tap “Wi-Fi SETTING”.
(Operation on this camera)
![C5B Wi-Fi MENU1](fig/C5B Wi-Fi MENU1_UJDCILhtywesgd.png)
Tap “ACCESS POINTS”.
(Operation on this camera)
![C5B WiFi SET ACCESSPOINT](fig/C5B WiFi SET ACCESSPOINT_UJDCILwltcsild.png)
Tap “ADD”.
(Operation on this camera)
![C4B9 WiFi ACCESS POINTS ADD](fig/C4B9 WiFi ACCESS POINTS ADD_UJDCILuyzvgggv.png)
Tap “WPS PIN”.
(Operation on this camera)
![C5B WiFi ACCESS POINTS ADD WPS_P](fig/C5B WiFi ACCESS POINTS ADD W~_UJDCILxintmvgn.png)
The PIN code appears.
Enter the PIN code displayed on the camera to the access point (wireless LAN router).
For details on how to enter the PIN code, refer to the instruction manual of the device in use.
Tap “START”.
(Operation on this camera)
![C2-WiFi_ACCESS POINTS_ADD_WPS_P2](fig/C2-WiFi_ACCESS POINTS_ADD_WP~_JEAWILjvvbkdcc.png)
Tap “START” after entering PIN code to the access point (wireless LAN router).
(Connection cannot be established if “START” is tapped before entering the code.)
After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
![WiFi_ACCESS POINTS_ADD_WPS2](fig/WiFi_ACCESS POINTS_ADD_WPS2_JEAWILjmuyeujh.png)
Select the access point, then tap “SET”.
![C4B9 WiFi ACCESS POINTS ADD2](fig/C4B9 WiFi ACCESS POINTS ADD2_CMJNILbchwcpjl.png)
If several access points are registered, tap on the access point to be used, then tap “USE”.
To delete the access point registered, tap on the access point, then tap “DELETE”.