> Using the Different Features (Using the App) > Listening to music
Listening to music
Identify the L and R sides of the earphones and put them on correctly.
There is a semicircle raised bump on the L (left) side.
Left: Bump
Hold the earphones as illustrated in the diagram so as not to touch the touch sensor areas, and fit them into your ears.
Touch sensor area
Insert the earphones with the logo in the horizontal position. Rotate the earphones and adjust to the most comfortable angle.
The medium-size silicone ear pieces are attached when purchased.
To enjoy good sound quality, choose the most suitable earpieces from XS/S/M/L and fit them into your ears.
Using an ear piece that is not of the right size can result in a lack of bass or reduction of the noise canceling effect.
Check that the ear piece is securely attached as shown in the figure.
Correct
Wrong
If the ear piece is not securely attached, it may slipped off when in use and remain in your ear. If the ear piece remains in your ear, be careful not to push it further into your ear.
Launch the music player app on the BLUETOOTH device connected, to start playback.
1x
1x
2x
2x
3x
3x
5x
1second
1second
Touch sensor area
Switching on/off the ambient sound function
Switching on/off the noise canceling function
Switching on/off the low latency mode
Switching the sound mode
Play/Pause (
)
Tap the touch sensor area on the L earphone once quickly.
Switching on/off the ambient sound function (Touch & Talk function)
Tap the touch sensor area on the R earphone once quickly.
When the ambient sound function is used, the volume of the music playback will decrease and ambient sounds can be heard more easily with the built-in microphone.
When the noise canceling function is turned on, one quick tap on the R touch sensor area switches between the noise canceling function and the ambient sound function.
Volume adjustment (
/
)
To raise the volume, tap the touch sensor area on the L earphone 3 times quickly.
To lower the volume, tap the touch sensor area on the L earphone twice quickly.
Skip to the next track (
)
During playback, tap the touch sensor area on the R earphone twice quickly.
Skip to the previous track or beginning of the current track (
)
During playback tap the touch sensor area on the R earphone 3 times quickly.
Switching on/off the noise canceling function
Touch the touch sensor area of the R earphone for about 1 second, and release your finger when you hear a beep sound.
Using the noise canceling function mainly helps to reduce ambient noises such as noise in a vehicle and noise from air conditioners in a room.
You will hear an audio guidance when the function is switched.
The noise canceling function is set to on when purchased.
Selected function can be switched by changing the setting of “Switching settings for control keys” in the app. You can select Noise canceling, Wind Cut, or Off.
Switching the sound mode
Touch the touch sensor area of the L earphone for about 1 second, and release your finger when you hear a beep sound.
Each time you tap the earphone for about 1 second and release your finger, the sound mode will switch alternately as follows.
FLAT
BASS
CLEAR
You will hear an audio guidance when the function is switched.
Switching on/off the low latency mode
Tap the touch sensor area on the L earphone 5 times quickly.
When you feel that there is a time lag between the video images and audio sound while viewing a video, using the low latency mode can help to reduce the lag.
“Low Latency (JP)” can be heard from the audio guidance when you turn on the low latency mode. “Normal Latency (JP)” can be heard from the audio guidance when you turn off the low latency mode.
The music will return to the original volume when a user quits the ambient sound function. If you have raised the volume while listening to surrounding sounds, take note that the volume will increase when you return to music playback.
The ambient sound function draws surrounding sounds from the built-in microphone. Touching the microphone hole allows you to hear a noise. Take note not to touch or cover the microphone hole accidentally when operating the earphone.
Microphone hole
The noise canceling function is effective for low-pitched sounds such as noise in a vehicle and noise from air conditioners in a room but less effective for relatively high-pitched sounds such as announcements, conversations and bells in vehicles.
The audio that is currently playing may be interrupted when you are using the low latency mode. For more details about how to address this issue, please refer to Troubleshooting
When the remaining battery power becomes low, you will hear a notification via the audio guidance.
The settings for the noise canceling function, sound mode and low latency mode are stored even when the power is turned off.
When watching movies with the earphones, a slight time lag may occur in the audio output.
We do not guarantee all operations of the BLUETOOTH device.
Launch the music player app on the BLUETOOTH device connected, to start playback.
The L earphone is used in the illustration.
1x
2x
3x
Touch sensor area
Play/Pause ()
Tap the touch sensor area once quickly.
Volume adjustment (/)
To raise the volume, tap the touch sensor area 3 times quickly.
To lower the volume, tap the touch sensor area twice quickly.
When the remaining battery power becomes low, you will hear a notification via the audio guidance.
When watching movies with the earphones, a slight time lag may occur in the audio output.
We do not guarantee all operations of the BLUETOOTH device.