• home
  • Copying
  • Creating a Disc Using a Connected Blu-ray Recorder

Creating a Disc Using a Connected Blu-ray Recorder

You can create discs using a Blu-ray recorder by connecting it to this unit using a USB cable.

Connect to a Blu-ray recorder.

Turn on the power after connecting the AC adapter to the DC connector, and plugging in the power.
Connect this unit and Blu-ray recorder by using the provided USB cable.
C3Z Non VF PCconnect Blu-ray AP-V30-2

Tap “CONNECT TO OTHER”.

C3Z_CONNECT TO OTHER

Tap the desired media.

C3Z_CONNECT TO OTHER1

The following screen is displayed after the camera operation is completed.

CONNECT TO OTHER_2_SD

Operations are to be performed on the Blu-ray recorder after the screen switches.

Perform dubbing on the Blu-ray recorder.

Refer also to the instruction manual of the Blu-ray recorder.

After dubbing is complete, disconnect the USB cable. Operations cannot be performed on this unit until the USB cable is disconnected.