-
- Getting Started
-
Inserting an SD Card
Inserting an SD Card
When a commercially available SD card is inserted, recordings can still be made to the card without stopping when the remaining recording time on the built-in memory runs out.
Turn off the power.
Open the LCD monitor.
Open the battery cover.
Insert an SD card.
Close the battery cover, and then close the LCD monitor.
Warning
Make sure not to insert the SD card in the wrong direction.
It may cause damage to the unit and SD card.
Turn off the power of this unit before inserting or removing an SD card.
Do not touch the metal contact area when inserting the SD card.
Memo
When “SEAMLESS RECORDING” is set to “ON”, recordings can still be made to the SD card without stopping when the remaining recording time on the built-in memory runs out.
Both videos and still images can be recorded on one SD card. It is recommended to confirm the video operation of the SD card before usage.
To record to the SD card, it is necessary to perform media settings.
To use SD cards that have been used on other devices, it is necessary to format (initialize) the SD card using “FORMAT SD CARD” from media settings.
Removing the Card
Push the SD card inward once, then pull it out straight.
