This menu is used to set the displays on the LCD monitor and viewfinder screen.
Display Settings Item
TOPZoom
For setting the display method of the zoom position.
Number:
Displays the zoom position in numbers (0-99).
Bar:
Displays the zoom position in a bar.
Off:
Does not display the zoom position.
[Setting Values: Number, 
Bar, Off]
Focus
For setting the display method of the approximate distance to the subject in focus during manual focus.
Feet:
Displays the focus in feet.
Meter:
Displays the focus in meters.
Off:
Does not display the focal length during focus.
[Setting Values: Feet, Meter, Off]
ND Filter
For setting whether to display the filter position.
On+Assist:
Displays the current filter position.
If the ND filter setting is inappropriate, the appropriate ND filter to select will appear blinking.
On:
Displays the current filter position.
Off:
Hides the filter position.
[Setting Values: On+Assist, On, Off]
Record Format
For setting whether to display the video format during recording or playback.
[Setting Values: On, Off]
Media Remain
For setting whether to display the remaining space of the recording SD card.
[Setting Values: On, Off]
Memo
When the remaining space warning is displayed, the information appears even when “Off” is selected.
The displayed time is an estimate.
TC/UB
For specifying whether to display the time code (TC) or user’s bit (UB) rate in the display on the LCD monitor and viewfinder screen.
[Setting Values: UB, TC, Off]
Audio Meter
For specifying whether to display the audio level meter on the LCD monitor and viewfinder screen.
[Setting Values: On, Off]
Battery
For setting the display of the remaining battery power in the display on the LCD monitor and viewfinder screen.
The battery information appears only on the Display 2 screen in Camera mode.
Time:
Displays the remaining battery power in minutes. (min)
Capacity%:
Displays the remaining battery power in percentage. (%)
Voltage:
Displays the current battery voltage in units of 0.1 V. (V)
Off:
The remaining battery power is not displayed.
[Setting Values: Time, Capacity%, Voltage, Off]
Memo
The battery mark that appears before the “Time”, “Capacity%” or “Voltage” value changes according to the remaining battery power.
In addition, the plug mark is added during charging.
:
10 % and below
:
11 % to 30 %
:
31% to 70 %
:
71 % to 100 %
When the remaining battery power is low, “RES” instead of the value is displayed.
Replace the battery as soon as possible.
The remaining battery power and remaining time are intended as reference values for the shooting duration.
The time, capacity or voltage will not be displayed during charging.
Date/Time
For specifying whether to display the date and time in the display on the LCD monitor and viewfinder screen.
[Setting Values: On, Off]
Date Style
For setting the date display sequence for display on the LCD monitor and viewfinder screen as well as for time stamp recording.
Display examples of the setting values are as follows.
DMY2: 30 Jun 2018
DMY1: 30-06-2018
MDY2: Jun 30, 2018
MDY1: 06-30-2018
YMD: 2018-06-30
[Setting Values: DMY2, DMY1, MDY1, MDY2, YMD]
(Default values: MDY2 (U model), DMY1 (E model))
Time Style
For setting the time display for display on the LCD monitor and viewfinder screen as well as for time stamp recording.
[Setting Values: 24hour, 12hour]
(Default values: 12hour (U model), 24hour (E model))
Shutter
For setting the shutter display to be displayed on the LCD monitor and viewfinder screen.
DEG:
Displays the shutter speed in degrees in the same way as film cameras.
SEC:
Displays the shutter speed in seconds.
[Setting Values: DEG, SEC]
Memo
“DEG” is selectable only when [ 
Frame & Bit Rate] is set to “24p” or “25p”.
When [ Frame & Bit Rate] is set to other values, the shutter display setting is fixed at “SEC” and cannot be selected.
, Frame & Bit Rate 
