For specifying network-related settings.
The display of the software keyboard for input varies according to the item you are setting.
Network/Settings Item 
TOP
Web
For setting the functions that make use of the web browser.
Web Access
To access via a web browser, set to “On”.
[Setting Values: 
On, Off]
Camera Name
For setting the name displayed on the web browser. Enter not more than 8 characters using the software keyboard.
(Default value: HM660)
Login Name (Fixed)
The login name is fixed as “prohd”. It cannot be changed.
Change Password
Changes the password for accessing via a web browser.
The current password is displayed. Enter a new password directly.
Enter not more than 31 characters using the software keyboard.
Live Streaming Set
For specifying settings for distributing live video images.
Memo
The settings cannot be changed during live streaming.
Users cannot access this menu in the following cases.
When [Record Format] 
[System] is set to “HD+SD” or “HD+Web”
When [Record Format] [Frame & Bit Rate] is set to “24p”, “50p” or “60p”
(*“50p” and “60p” are for 1920x1080 resolution)
Live Streaming
Starts live distribution when “On” is selected.
[Setting Values: On, Off]
Memo
“On” cannot be selected if network connection is not established.
“On” cannot be selected when FTP is running.
Live streaming switches to “Off” when the power is turned off.
Server
For selecting the server for live streaming.
[Setting Values: Server1, Server2, Server3, Server4]
Memo
The setting cannot be changed during live streaming (Live Streaming set to “On”).
Streaming Server
For setting the server for live streaming.
Memo
The setting cannot be changed during live streaming (Live Streaming set to “On”).
Server1/Server2/Server3/Server4
Alias
For setting a name to distinguish the settings of this camera recorder.
The name set in this item will be displayed in the [Server] options.
The default value is “Server1/Server2/Server3/Server4”.
You can enter up to 31 characters and ASCII characters.
Type
For setting the system to transfer videos for distribution.
[Setting Values: MPEG2-TS/UDP, MPEG2-TS/TCP, MPEG2-TS/RTP, RTSP/RTP, ZIXI, RTMP]
Memo
Use reception devices that are compatible with the respective transfer systems.
To use the “ZIXI” setting, a dedicated server is needed separately.
The following items that can be set vary depending on the setting of this item.
Destination Address
For setting details such as the host name and the IP address of the live distribution destination.
Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.].
Destination URL
For entering the URL of the live distribution destination beginning with “rtmp://”.
There is no default value (blank).
You can enter up to 191 characters and ASCII characters.
Destination Port
Enter the network port number of the live distribution destination using an integer between 1 and 65535.
When [Type] is set to “MPEG2-TS/UDP”, “MPEG2-TS/TCP” or “MPEG2-TS/RTP”, the default value is “6504”. If “ZIXI” is set, the default value is “2088”.
Memo
When [Type] is set to “MPEG2-TS/RTP”, only even numbers from 2 to 65530 can be specified for the port number.
When [Type] is set to “MPEG2-TS/RTP” and [SMPTE 2022-1 FEC] is set to “On”, N+2 and N+4 port numbers are also used in addition to the specified port number (N).
Stream ID
For setting the registered stream ID of the live distribution destination.
The default value varies with the product model.
Enter not more than 63 characters.
Stream Key
Enter the stream key specified at the live transmission destination.
There is no default value (blank).
Enter not more than 63 characters.
Password
For setting the [Stream ID] password.
There is no default value (blank).
Enter not more than 127 characters. When [Type] is set to “RTSP/RTP”, enter not more than 31 characters.
Latency
For setting the latency mode.
[Setting Values: High, Medium, Low, Minimun(ZIXI Off)]
Adaptive Bit Rate
If “On” is selected, the bit rate setting value of live streaming is set to maximum limit, and the bit rate is changed automatically according to changes in the network bandwidth.
[Setting Values: On, Off]
Memo
[Adaptive Bit Rate] is selectable when [Type] is set to “ZIXI” and [Latency] is set to a value other than “Minimun(ZIXI Off)”.
The bit rate is displayed on the status screen only when “On” is set.
PCR Jitter
Setting to “Low” reduces to PCR jitter of live streaming.
[Setting Values: Low, Normal]
Memo
This item is selectable only when [Type] is set to “MPEG2-TS/UDP”.
SMPTE 2022-1 FEC
Set to “On” to use FEC (Forward Error Correction).
A transmission system that recovers the missing packets in the decoding process without having to retransmit the missing packets.
[Setting Values: On, Off]
The decoder must be compatible with SMPTE 2022-1.
FEC Matrix
For setting the amount of FEC (Forward Error Correction) overhead for configuring SMPTE2022-1.
Memo
This item is selectable only when [SMPTE 2022-1 FEC] is set to “On”.
Resolution
For setting the resolution of the video image during live distribution.
The camera recorder restarts when the setting is changed. “Please Wait...” will be displayed.
The available options vary according to the settings for [ 
Resolution] and [ Frame & Bit Rate] under [Record Format].
|
|
No. of Frames for |
Setting values |
|---|---|---|
|
1920x1080, 1440x1080 |
60i, 30p |
|
|
50i, 25p |
|
|
|
1280x720 |
60p, 30p |
1280x720, 720x480, 640x360 |
|
50p, 25p |
1280x720, 720x576, 640x360 |
|
|
720x480
|
60i |
720x480, 640x360 |
|
720x576
|
50i |
720x576, 640x360 |
Default value for U model
Default value for E model
Memo
The settings cannot be changed during live streaming or recording.
The Aspect Ratio for the live streaming image is fixed to “16:9”.
Frame & Bit Rate
For setting the frame rate and encoding bit rate of the video image during live distribution.
The available options vary according to the settings for [Resolution] above, as well as [ Frame & Bit Rate] under [Record Format].
|
No. of Frames for |
Resolution |
Setting values |
|---|---|---|
|
60p, 60i, 30p |
1920x1080 |
60i (12.0 M), |
|
1280x720 |
30p (8.0 M), |
|
|
720x480 |
60i (8.0 M), |
|
|
640x360 |
30p (3.0 M), |
|
|
50p, 50i, 25p |
1920x1080 |
50i (12.0 M), |
|
1280x720 |
25p (8.0 M), |
|
|
720x576 |
50i (8.0 M), |
|
|
640x360 |
25p (3.0 M), |
Default value for U model
Default value for E model
Memo
The settings cannot be changed during live streaming.
An encoding bit rate exceeding 5.0 Mbps cannot be selected when [Type] is set to “MPEG2-TS/RTP” or “RTSP/RTP”.
An encoding bit rate exceeding 5.0 Mbps cannot be selected when [Type] is set to “ZIXI” and [Latency] is set to other than “Low”.
An encoding bit rate exceeding 3.0 Mbps cannot be selected when [Type] is set to “ZIXI” and [Latency] is set to “Low”, or when [Type] is set to “RTMP”.
Connection Setup
For specifying the settings for connecting to the network.
A [Wizard] screen will appear according to the adapter connected to the rear [HOST] terminal. Follow the instructions to perform the setting.
You can Load, Store, and Delete the settings specified on the [Wizard] screen.
Wizard
A [Wizard] screen appears according to the type of adapter that is connected to the rear [HOST] terminal.
Follow the instructions.
Load
Loads the settings on the [Wizard] screen.
Store
Saves the settings on the [Wizard] screen.
Delete
Deletes the saved settings.
APN
For specifying APN (Access Point Name).
This item is grayed out and cannot be selected if APN cannot be set for the adapter attached.
Caution
The APN setting is written into the cellular adapter, not this camera recorder.
Setting a wrong APN may result in communication failure or expensive bills from the telecommunications company. Set the APN correctly.
Metadata Server
For registering the FTP server for importing the metadata and the path of the file to be imported.
Up to 4 settings can be registered.
Meta-FTP1 to Meta-FTP4
(The name specified in the respective [Alias] items is displayed)
Alias
For setting a name to distinguish the settings of this camera recorder.
The name set in this item will be displayed in the [Import Metadata] options.
Enter not more than 31 characters.
Protocol
For setting the protocol of the FTP server to be connected.
FTP:
Protocol that does not encrypt the incoming and outgoing data.
SFTP:
Protocol that encrypts incoming and outgoing data using SSH.
FTPS:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an implicit mode (starts encrypted communication once connection starts).
FTPES:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an explicit mode (starts encrypted communication after permission is granted).
[Setting Values: FTP, SFTP, FTPS, FTPES]
Server
For setting the server name (“mystation.com”, etc.) or the IP address (“192.168.0.1”, etc.) of the FTP server.
Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.].
Port
Enter the FTP server port number to use using an integer between 1 and 65535.
The default value varies with the Protocol setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21)
File Path
Enter the path name for the metadata file (“/pub/meta.xml”, “/home/user/meta2.xml”, etc.)
Enter not more than 127 characters.
Username
Enter the user name for connecting to the FTP server.
Enter not more than 31 characters.
Password
Enter the password for connecting to the FTP server.
Enter not more than 31 characters.
PASV Mode
For setting whether to set the communication mode used for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and a connection from the FTP server to the camera cannot be established.
[Setting Values: On, Off]
Memo
When [Protocol] is set to “SFTP”, this item appears as “---” and cannot be selected.
Clip Server
For setting the server and directory for uploading recorded clips in the SD card to the FTP server.
Clip-FTP1 to Clip-FTP4
(The name specified in the respective [Alias] items is displayed)
Alias
For setting a name to distinguish the settings of this camera recorder.
The name set in this item will appear on the [FTP Upload] action screen of the thumbnail display.
Enter not more than 31 characters.
Protocol
For setting the protocol of the FTP server to be connected.
FTP:
Protocol that does not encrypt the incoming and outgoing data.
SFTP:
Protocol that encrypts incoming and outgoing data using SSH.
FTPS:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an implicit mode (starts encrypted communication once connection starts).
FTPES:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an explicit mode (starts encrypted communication after permission is granted).
ZIXI:
Enables stable transmission by reducing jitter and packet loss significantly through communicating via a relay server.
[Setting Values: FTP, SFTP, FTPS, FTPES, ZIXI]
Memo
To use the “ZIXI” setting, a dedicated server is needed separately.
If “ZIXI” is set, the resume function is enabled.
Server
For setting the server name (“mystation.com”, etc.) or the IP address (“192.168.0.1”, etc.) of the FTP server.
Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.].
Port
Enter the FTP server port number to use using an integer between 1 and 65535.
The default value varies with the Protocol setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21, ZIXI: 2088)
Dir. Path
Enter the path name for the directory to upload to (“/pub”, “/home/user”, etc.)
Enter not more than 127 characters.
Username
Enter the user name for connecting to the FTP server.
Enter not more than 31 characters.
Stream ID
For setting the registered stream ID of the upload destination.
The default value varies with the product model.
Enter not more than 63 characters.
Password
Enter the password for connecting to the FTP server.
Enter not more than 31 characters. When [Protocol] is set to “ZIXI”, enter not more than 127 characters.
PASV Mode
For setting whether to set the communication mode used for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and a connection from the FTP server to the camera cannot be established.
[Setting Values: On, Off]
Memo
When [Protocol] is set to “SFTP” or “ZIXI”, this item appears as “---” and cannot be selected.
Reset Network
Restores all items in the [Network] menu to their default settings.
