For specifying network-related settings.
The display of the software keyboard for input varies according to the item you are setting.
Network Menu
Connection Setup...
For configuring the network connection settings.
A [Wizard] screen will appear according to the mode of connection. Follow the instructions to perform the setting.
The preconfigured settings can be loaded, saved or deleted.
Memo
Users cannot access this menu in the following cases.
During manual FTP transfer
During live streaming
Return over IP in Progress
Live Streaming...
For configuring settings for distributing live video images and audio.
Memo
Users cannot access this menu in the following cases.
When [Record Format] 
[System] is set to a setting other than “HD” or “SD”
During FTP transfer
When [Record Format] [Frame Rate] is set to “24p”
Return over IP...
For configuring settings related to Return over IP.
This function allows video and audio to be received via the network.
Memo
Users cannot access this menu in the following cases.
Recording
When [Record Format] [System] is set to a setting other than “HD” or “SD”
When [Record Format] [Frame Rate] is set to “24p”
When [Overlay Settings] [Overlay Function] is set to “Enable” 
When [Record Set] [Time Stamp] is set to “On”
When [Slot Mode] is set to “Backup 
”
When [Optional Adapter] is set to “Enable”
Web...
For setting the functions that make use of the web browser.
Metadata Server...
For registering the FTP server for importing the metadata and the path of the file to be imported.
Up to 4 settings can be registered.
Upload Settings...
For configuring the method for uploading to the FTP server as well as the server and directory for uploading the clip recorded in the media to the FTP server.
Import Metadata
For importing metadata from the FTP server.
Metadata loaded by the setup files (“User File”/“All File”) will be deleted.
Memo
This option is not selectable if the network connection is not established.
This option is not selectable while using the network.
NTP
The time of the videos recorded simultaneously on multiple cameras can be synchronized by reflecting the time information retrieved from the NTP server in the time code.
The synchronization status with the NTP server can be checked in the Status screen (network).
Memo
If the network connection is incomplete, a different result may occur.
An error of about several frames may occur in the time code information that reflects the NTP time.
It may take a while to update the synchronization with the NTP server. To update immediately, turn off the power first, then turn it on again.
Server Address
For setting the address of the NTP server.
If this is not configured, “Master Mode” appears on the Status screen (network).
However, “Not Synchronized” is displayed if the unit is not connected to a network when the power is turned on.
Zero Config
For allowing this camera recorder to be detected automatically by external devices (such as switchers) connected to the same LAN. Connection can be established via one link from the menu of the external device.
Memo
The Zero Config function is not equipped with the function to change the settings of the camera recorder.
Announcement
For configuring the method of connection from an external device during automatic detection of this camera recorder.
[Setting Values: 
On, Off]
Hostname Prefix
Part of the host name can be changed.
It will appear in the format of “XXXX-YYYY.local” on the Status screen (network).
XXXX:
Character string (maximum 8 characters) configured in [Hostname Prefix]
YYYY:
Serial number of this camera recorder
Memo
When [Announcement] is configured to “Off”, this item does not appear on the status screen (Connection Setup).
Reset Network
Restores all items in the [Network] menu to their default settings.
