A.Tap the buttons on the touch screen with your fingers.
-
- Troubleshooting
-
Other Problems
Troubleshooting
A.The buttons may not respond if you touch them with your fingernails or with gloves on.
A.Disable “SCREEN LOCK”. You cannot operate the touch panel when “SCREEN LOCK” is enabled.
A.Save the recorded data before requesting service.
Connect to computer using a USB cable.
The “SELECT DEVICE” menu appears.
The “SELECT DEVICE” menu appears.
Press and hold the START/STOP button for more than 2 seconds.
The “PLAYBACK ON PC” appears.
The “PLAYBACK ON PC” appears.
Operations are to be performed on the computer after the screen switches.
A.When digital zoom is used, the image becomes grainy as it is digitally enlarged.
A.This is not a malfunction. (This unit may become warm when used for a long time.) Stop using the unit if it gets too warm.
A.It may occur when you connect this unit to a TV with different language setting using an HDMI mini cable.
A.Images and sounds may not be output properly depending on the TV connected. In such cases, perform the following operations.
Disconnect the HDMI mini cable and connect it again.
Turn off and on this unit again.
A.TVs may operate differently depending on the specifications, even if they are HDMI-CEC compliant. Therefore, the HDMI-CEC functions of this unit cannot be guaranteed to operate in combination with all the TVs. In such cases, set “HDMI CONTROL” to “OFF”.
A.It is recommended that you copy all videos and still images onto your computer, and erase the files from this unit. (If there are many recorded files on this unit, it takes time for the unit to respond.)
A.This unit is a microcomputer-controlled device. Electrostatic discharge, external noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such a case, close the monitor screen to turn off the power and remove the AC adapter, then press the Reset button to reset this unit.
A.After closing the LCD monitor, remove the AC adapter. Reattach the AC adapter, and turn on the power by opening the LCD monitor. If these operations won’t solve the problem, contact your JVC dealer or the JVC service center.
A.- We shall not be held responsible for loss of recorded contents when recording videos/audio or playback cannot be operated due to malfunctions in this unit, provided parts, or SD card.
- Once deleted, recorded contents (data), including data loss due to malfunctions in this unit, cannot be restored. Please be forewarned.
- JVC will not be responsible for any lost data. Please be forewarned.
- In order for quality improvement, defective recording medium is subject to be analyzed. Therefore, it may not be returned.