Troubleshooting

A.Sometimes playback is interrupted at the connecting section between two scenes. This is not a malfunction.

A.When the Silent mode is used, operation sounds will not be output. Turn off the Silent mode.

A.Set “OPERATION SOUND” in the “SETUP” menu to “ON”.

A.Audio sound is not recorded for videos taken in TIME-LAPSE RECORDING.

A.Use a high speed SD card (Class 4 or higher).

A.Clean the terminals of the SD card with a dry cotton swab or something similar.

A.Execute “FORMAT SD CARD” in the “MEDIA SETTINGS” menu. (All data will be deleted.)

A.Use a high speed SD card (Class 4 or higher).

A.Clean the terminals of the SD card with a dry cotton swab or something similar.

A.Execute “FORMAT SD CARD” in the “MEDIA SETTINGS” menu. (All data will be deleted.)

A.Verify the system requirements of your PC when using Everio MediaBrowser 4 to play back.

A.Change the playback media by tapping / on the touch screen.

A.Select “PLAYBACK OTHER FILE” in the menu. (Video files that have damaged management information can be played back.)

A.Disconnect the cable and connect again.

A.Reset this unit.

A.Set “VIDEO OUTPUT” in the “MEDIA SETTINGS” menu to “4:3”.

A.Adjust the TV's screen accordingly.

A.Set “VIDEO OUTPUT” in the “MEDIA SETTINGS” menu to “16:9”.

A.Images and sounds may not be output properly depending on the TV connected. In such cases, perform the following operations.