A.The clock is reset about one month after the battery is depleted. Therefore, “SET DATE/TIME!” will appear the next time the power is turned on. Set the clock again after charging the battery.
- Troubleshooting
-
Error Message?
Troubleshooting
A.Reconnect the USB cable.
A.Turn off and on the devices connected to this unit, and reset this unit.
A.Reset this unit.
A.Reset this unit.
A.If the above does not solve the problem, back up your files and execute “FORMAT BUILT-IN MEM.” in the “MEDIA SETTINGS” menu. (All data will be deleted.)
A.Check that the card is supported by this unit.
A.Reset this unit.
A.Turn off this unit, then remove and re-insert the SD card.
A.Remove any dirt from the SD card terminals.
A.If the above does not solve the problem, back up your files and execute “FORMAT SD CARD” in the “MEDIA SETTINGS” menu. (All data will be deleted.)
A.Select “OK”, then select “YES” on the “DO YOU WANT TO FORMAT?” screen.
A.Reset this unit.
A.Stop video recording before taking still images. (If the SD card is removed and inserted during video recording, still images cannot be recorded.)
A.Remove and re-insert the SD card.
A.Remove any dirt from the SD card terminals.
A.Insert the SD card before turning on the power.
A.Do not subject this unit to any strong impact or vibration.
A.Select “OK” to restore. (Videos that cannot be restored will not be displayed on the index screen, but you may be able to play them back using “PLAYBACK OTHER FILE” in the menu.)
A.Use files recorded with this unit. (Files recorded with other devices may not be playable.)
A.Use files recorded with this unit. (Files recorded with other devices may not be playable.)
A.Switch off the “PROTECT/CANCEL” function in the “EDIT” menu.
A.Set the write protect switch of the SD card to off.
A.Delete files, or move files to a computer or other devices.
A.Replace the SD card with a new one.
A.Seamless videos cannot be combined if there is not enough free space in the built-in memory or SD card. Check the amount of remaining free space before combining.
A.Reduce the number of the playlist to 99 files or less. (Up to 99 playlists can be created.)
A.The number of videos that can be recorded on a disc has exceeded. Make sure the number of videos recorded in 50i mode (“SYSTEM SELECT” set to “50i”) does not exceed 999, and the videos recorded in 50p mode (“SYSTEM SELECT” set to “50p”) does not exceed 200.
A.Change the setting of “REC MEDIA FOR IMAGE” or “REC MEDIA FOR VIDEO” in the “MEDIA SETTINGS” menu, and check that files are not recorded to the other media.
A.Turn off the power of this unit, let and it cool down before turning on the power again.
A.Turn on the power of the connected USB device.
A.Connect the AC adapter to the DVD writer or BD writer (external Blu-ray drive).
A.Open the tray of the DVD writer or BD writer (external Blu-ray drive), check and reset the DVD or Blu-ray disc, then close the tray.
A.Replace the disc in the DVD writer or BD writer (external Blu-ray drive).
A.Open the tray of the DVD writer or BD writer (external Blu-ray drive), check and reset the DVD or Blu-ray disc, then close the tray.
A.Replace the disc in the DVD writer or BD writer (external Blu-ray drive).