Saving and Retrieving Adjustment Settings
TOP
The Focus, Zoom, and Shift settings can be saved or retrieved, so you can switch easily to a different aspect ratio (screen size) according to the image.
In a state where no adjustment settings are saved (factory default), only “Lens Memory Save” is displayed.
Operation of the lens control feature is disabled when the lens lock is set to “On”.
Saving an adjustment data
You can also save an adjustment data by selecting “Installation” 
“Lens Control” “Lens Memory Save” from the menu.
The adjustment data is saved.
Items with no adjustment data saved are displayed as [----].
If you have selected an item for which an adjustment data has already been saved, the old data will be overwritten.
You can change the name when saving an item. (LINK)
The maximum number of items can be saved is 10 for 
and 5 for 
.
Retrieving an adjustment data
You can also retrieve an adjustment data by selecting “Installation” “Lens Control” “Lens Memory Select” from the menu.
MEMORY1 and 2 can also be retrieved using the direct keys on the remote control.
The retrieved data is adjusted automatically.
If no adjustment data has been saved, the item will be grayed out and cannot be selected.
Renaming an adjustment data
You can also edit an adjustment data by selecting “Installation” “Lens Control” “Lens Memory Name Edit” from the menu.
An edit screen appears.
You can input up to 10 characters.
Characters that are usable include alphabets (upper or lower case), numeric characters, and symbols.
Pressing the [Back] button cancels the content that is currently being edited, and exits the edit mode.