> Audio / Phone > Audio operation
Audio operation
Wearing
Identify the L and R sides of the earphones and put them on correctly.
Adjust the position of the earphones to fit them into your ears.
Standard earpieces and memory foam earpieces are supplied.
The medium-size memory foam earpieces are attached when purchased.
To enjoy good sound quality, choose the most suitable earpieces and size and fit them into your ears.
Incorrect ear piece size can result in sound leakage and lack of bass.
Check that the ear piece is securely attached as shown in the figure.
If the ear piece is not securely attached, it may slipped off when in use and remain in your ear. If the ear piece remains in your ear, be careful not to push it further into your ear.
Compress the memory foam earpiece with your fingers and insert the earphone into your ear. When compressing the memory foam earpiece, take care not to damage the surface.
The memory foam earpiece is a part made of soft sponge material. Slowly remove or attach the earpiece toward the direction in which excessive force is not applied.
Excessive force on the earpiece can cause damage. If the earpiece is damaged, stop using and replace it with a new one.
Avoid exposing the earpiece to direct sunlight or store it in hot and humid places as this will cause discoloration and deterioration of the earpiece. If the earpiece is not used for a long time, check the status of the earpiece before using.
Replace the earpiece if it has lost its elasticity, or has become dirty, damaged or deformed.
When replacing the earpiece, take care not to damage it.
Operating the remote control
Launch the music player app on the BLUETOOTH device connected, to start playback.
1x
1x
1second
1second
2x
2x
Listening to/quit listening to surrounding sounds
Play/Pause (
)
Press the button on the L earphone once quickly.
Listening to/quit listening to surrounding sounds (Touch & Talk function)
Press the button on the R earphone once quickly.
This function lowers the volume of the playback music and allows you to hear surrounding sounds better with the built-in microphone.
Volume adjustment (
/
)
To raise the volume, press the button on the R earphone twice quickly.
To lower the volume, press the button on the L earphone twice quickly.
Skip to the next track (
)
During playback, press and hold the R button for about 1 second and release your finger when a beep is heard.
Skip to the previous track or beginning of the current track (
)
During playback, press and hold the L button for about 1 second and release your finger when a beep is heard.
The music will return to the original volume when a user quits the Touch & Talk function. If you have raised the volume while listening to surrounding sounds, take note that the volume will increase when you return to music playback.
The Touch & Talk function is disabled during an incoming call, during a call, or using the voice recognition function. The Touch & Talk function will be enabled once these operations end.
The Touch & Talk function draws surrounding sounds from the built-in microphone. Touching the microphone hole allows you to hear a noise. Take note not to touch or cover the microphone hole accidentally when operating the earphone.
Microphone hole
The Touch & Talk function can only be used when the System is connected to a BLUETOOTH device. When the System is disconnected from the BLUETOOTH device, the Touch & Talk function is automatically disabled.
When the remaining battery power becomes low, a beep is heard repeatedly from the earphone that had ran out of battery.
When the remaining battery power becomes low, the power will turn off automatically from the earphone that had ran out of battery.
When using both L and R earphones, if the power of one earphone has run out, you can still use the remaining earphone.
When watching movies with the earphones, a slight time lag may occur in the audio output.
We do not guarantee all operations of the BLUETOOTH device.