> Connecting (Power On) > Reconnect

Reconnect

Turn on the Bluetooth function on the device to connect, followed by taking both earphones from the charging case. The power of the earphones turns on automatically, and they are automatically reconnected with the last connected device.

connecting_A11T_1

For details on base unit and extension unit, refer to Connecting the System.

If reconnection cannot be established, operate the BLUETOOTH device to connect.

If connection is not established for more than 5 minutes, the power of the earphones automatically turn off.

1Check that the power of the earphones is off. Power Off

2Turn on the BLUETOOTH function of the device to connect, followed by pressing and holding the button on the L and R earphones at the same time for about 3 seconds.

PLAY_button_LR_A11T

  1. The indicator flashes and the power turns on.

  2. When the indicator starts to flash slowly, the earphones will attempt to establish connection with the last connected device.

  3. After connection is established, the L and R indicators continue to flash every 5 seconds.

    4. blue_flash_A11T

    The earphones reconnect with the device that was last connected and can now be used for listening to music.

For details on base unit and extension unit, refer to Connecting the System.

If reconnection cannot be established, operate the BLUETOOTH device to connect.

If you cannot hear sounds from both earphones, it means that the L and R earphones are not connected. In this case, turn off the power of both the L and R earphones, followed by turning on their power again at the same time.

Pressing and holding the button for about 5 seconds switches the indicators to flash quickly. If this occurs, turn off the power of the earphone and repeat the steps from the beginning. Power Off

If connection is not established for more than 5 minutes, the power of the earphones automatically turn off.