Pairing

1Check that the indicator is turned off.
2Press and hold Function button () for about 3 seconds.: The indicator flashes red and blue quickly and alternately.

If the indicator does not flash red and blue quickly and alternately, refer to Power Off to turn off the power, then press and hold Function button () again.

When the indicator flashes slowly in blue, pairing is complete. To pair a new device, turn off the Bluetooth function of the device.
3Turn on the Bluetooth function of the BLUETOOTH device.
4Select “JVC HA-C300” from the device list.: JVC HA-C300

This indicator flashes slowly in blue when a connection is completed. The unit is enabled for hands-free calling.

During the pairing process, the BLUETOOTH device may require input of a PIN code. In such a case, enter “0000” as the PIN code for this unit.

If connection (pairing) is not completed within 3 minutes after the indicator starts flashing, this unit turns off automatically.