> Audio / Phone > Using the multipoint function

Using the multipoint function

The System can be paired with two devices (mobile phone, smartphone, etc) at the same time and goes into standby (multipoint).

Music cannot be played or a call cannot be answered on two devices simultaneously.

We do not guarantee all operations of the BLUETOOTH device. If the BLUETOOTH device cannot be operated using the System, operate on the BLUETOOTH device.

Depending on the BLUETOOTH device used, the other device may be disconnected while one device is in use.

When connecting the computer and smartphone using the mutlipoint, starting a conference or call on the computer may cause the System to lose connection with the smartphone and unable to reconnect depending on the surrounding environment and BLUETOOTH device. The connection will reestablish once the conference or call is ended.

1Pair the System with first BLUETOOTH device.

Refer to Connecting (Power On).

BLUETOOTH_S36W_Z37W

2Turn off the System.

power_on_off_S36W_Z37W

3Press and hold the Icon_Power_S36W button for more than 5 seconds.

connecting_S36W_Z37W

After a short while, the indicator starts to flash quickly and repeatedly.

4Pair the System with the second BLUETOOTH device.

Refer to Connecting (Power On).

BLUETOOTH_S36W_Z37W

When the connection is completed, the indicator starts to flash slowly.

5Operate the first BLUETOOTH device to connect to the System.

The audio guidance will play once the second BLUETOOTH device is connected.

During multipoint connection, you can answer incoming calls from the second BLUETOOTH device even while listening to music on the first BLUETOOTH device.

If the indicator continues to flashes quickly, this means the System and BLUETOOTH device are not connected to each other. Select the System on the BLUETOOTH device to connect.

When receiving a call on the second BLUETOOTH device during a call on the first BLUETOOTH device, you will hear a beeping ring tone with the voice call.

Operations of the System

Operating method

Answer a call on the second device

Press the Icon_Play_Pause_S36W button once quickly.

* When this happens, the connection with the first device is maintained, however you are unable to talk to the first device during a call with the second device. The call with the first device will resume once the call with the second device ends.

Reject a call from the second device and continue the call with the first device

Hold down the Icon_Play_Pause_S36W button for about 1 second.

When using the multipoint function (when two BLUETOOTH devices are connected), the operations (play/stop and voice recognition function activation) of the BLUETOOTH device from the headphones are as follows.

Music is played or a call is made on either device

The device that is playing the music or making a call will function. The other device does not function.

Both devices are on standby without playing music or making a call

One device will function while the other device does not function. You cannot select the preferred device to function.

Operate the preferred device to play music or make a call.