> Connecting (Power On) > Pairing (Registering a device)
Pairing (Registering a device)
-
1Check that the indicator is turned off.
-
2Press and hold the button until the indicator starts to flash quickly and repeatedly.
-
Release your finger once you confirmed that the indicator is repeatedly flashing.
If the indicator does not flash quickly (flashing slowly, for example), refer to Power Off to turn off the power, then press and hold the button again.
-
3Turn on the Bluetooth function of the BLUETOOTH device.
-
4Select “JVC HA-S36W” from the device list.
-
The indicator flashes slowly when a connection is completed.
During the pairing process, the BLUETOOTH device may require input of a PIN code. In such a case, enter “0000” as the PIN code for the System.
If connection (pairing) is not completed within 5 minutes after the indicator starts flashing, the System automatically turns itself off.