Controls the PTZ function. Operate the camera to adjust the direction, angle and focus.
[PTZ Control]
TOPThis page can be used during access using“admin” or “operator”.
While another menu is open, click
Auto Function
Select the operations.
Only “Auto Pan” can be selected.
Start the selected Auto function.
Stop the running Auto function.
Auto Pan:
Performs the configured auto pan operation.
Note
When the auto pan operation starts, the camera will repeat the left rotate, right rotate or return operations.
Preset Position
Select a preset position, and press the
[Set values: HOME, 1 to 99]
Memo
This product enables setting up to 100 preset positions, including HOME and 1 to 99.
For details about the preset position, see the
Focus
Adjust the focus.
Mode
Shows the current mode.
Easy AF:
Auto Focus (AF) will activate automatically when the pan or tilt function is operated manually. This is convenient as you need not reset the focus every time you move the camera when there are many manual operations.
Manual:
Click the[+] or [-] button to adjust the focus manually.
The focus will change while the [+] or [-] button is being pressed. It will stop when the button is released.
Click the
Memo
Pressing the[+], [-] or
The “Easy AF” function may not focus properly for some objects. In this case, set the focus manually.
Pan / Tilt / Zoom
Pan / Tilt operation:
Click the arrow buttons to move the display area in the direction indicated by the arrow. Release the button to stop the movement.
Click the [H] button to move to the home position.
Zoom operation:
Use this function to perform zoom operation on the display area.
[+]: Zooms in and enlarges an object.
[-]: Zooms out and reduces an object.
Scale display:
Displays the current magnification.
Memo
You can restrict the magnification of the object using the[+] button by altering the
Speed
Sets an operation speed.
Pan / Tilt
Controls the speed of
[Set values: 1 to 8]
Zoom
Controls the speed of
[Set values: 1 to 4]
Variable
This function adjusts the Pan/Tilt operation speed by the zoom ratio. Select the checkbox to slow down at the Tele end and to move quickly at the Wide end. Deselect the checkbox to move the camera at a constant speed configured in Pan/Tilt regardless of the zoom ratio.