> Connecting (Power On) > Reconnect (Power On)

Reconnect (Power On)

1Check that the indicator is turned off.

connecting_1_OFF_AE1W

2Turn on the BLUETOOTH setting of the BLUETOOTH device, and touch and hold the touch sensor area on the System until the indicator lights up in white.

Release your finger after the indicator lights up in white.

power_on_AE1W

The System then automatically attempts to reconnect the BLUETOOTH device used previously. If connection is established, the indicator continues to flash slowly in white.

When the indicator keeps flashing slowly in red, connection between the System and the BLUETOOTH device is not established. In this case, select the System on the BLUETOOTH device to connect.

When the touch sensor area is touched for 5 seconds or more while the power is turned off, the indicator flashes red and white alternately and the System enters into connection mode. In this case, select the System on the BLUETOOTH device to establish connection.