> Charging


When using a commercially available USB conversion AC adapter, make sure to choose one with an output voltage of DC 5 V and output current of 1 A and above. Otherwise, it may result in malfunction or abnormal heating.

Use only the supplied charging cable to charge the System.

Using the supplied charging cable, connect the System and a commercially available USB conversion adapter.

1Open the cover.


2Connect the charging cable provided to start charging.

Insert the USB AC adapter into the AC outlet to start charging.

The indicator lights up in red, and charging starts.

The charging time is approx. 2.5 hours. When charging is complete, the indicator goes out.

  • charging_AE1W_1
  • arrow
  • charging_AE1W_2
  • arrow
  • charging_AE1W_3

Operation is not possible while charging.

Charging may stop if the temperature exceeds the charging temperature range (5°C (41 °F) to 35°C (95 °F)). (The indicator flashes in red.) In that case, perform charging within the charging temperature range.

Depending on the BLUETOOTH device connected, the remaining battery power of the System will be displayed but this may not be accurate. Use it as a guide.

Except during charging, close the USB terminal cover completely to ensure the effectiveness of the water-resistant and dust-resistant performance.