> Audio / Phone > Listening to music

Listening to music

Wearing

1Identify the left and right headphones.

There is a semicircle raised bump on the L (left) side.

Wearing_AE1W + Wearing AE1W

Left: Bump

2Choose a earpiece that best fit in your ear from the S, M and L sizes.

The standard medium-size silicone earpieces are attached when purchased.

Standard earpieces and open type earpieces are supplied.
The open type earpiece allows you to hear your surroundings readily.

Earpiece Standard_AE1W

Standard earpiece

Earpiece Low_AE1W

Open type earpiece

Attach the earpiece securely as shown in Maru in the following figure.

Wearing_1-1_AE1W_AE5T

To enjoy better sound quality, use earpieces that fit well in your ears.
Incorrect earpiece size can result in sound leakage and lack of bass.

If the ear piece is not securely attached, it may slipped off when in use and remain in your ear. If the ear piece remains in your ear, be careful not to push it further into your ear.

3Choose a ear fin size that tucks snugly into your ear.

The ear fin comes in three sizes (S, M, L).

Ear_fins_AE1W_AE5T

The medium-size ear fins are attached when purchased.

L (left) side and R (right) side are indicated on the ear fins.
Attach them to the correct sides.

Wearing_2-1_AE1W

Attach the ear fin correctly as shown in Maru in the following figure.

Wearing_2-2_AE1W

4Insert the ear fin into your ear and fit it so that this System fits snugly into your ear when worn.

Wearing_2-4_AE1W + Wearing_2-4_AE1W

Ear fin

Listening to music

Launch the music player app on the BLUETOOTH device connected, to start playback.

Music Play_AE1W

Operating the remote control

Launch the music player app on the BLUETOOTH device connected, to start playback.

Functions_AE1W_U + Functions_AE1W

1x

1x

1second

1second

2x

2x

3x

Listening to/quit listening to surrounding sounds

Turning on/off Bass Boost

Touch sensor area

Play/Pause (Icon_Play-Pause)

Tap the touch sensor area on the L earphone once quickly.

Listening to/quit listening to surrounding sounds (Touch & Talk function)

Tap the touch sensor area on the R earphone once quickly.

This function lowers the volume of the playback music and allows you to hear surrounding sounds better with the built-in microphone.

Volume adjustment (Icon_Volume-Down/Icon_Volume-UP)

To raise the volume, tap the touch sensor area on the R earphone twice quickly.
To lower the volume, tap the touch sensor area on the L earphone twice quickly.

Skip to the next track (Icon_FF)

Touch the touch sensor area on the R earphone for about 1 second during playback and release your finger once you hear a beep.
The next track will be played after the playback of the current track has ended.

Skip to the previous track or beginning of the current track (Icon_REW)

Touch the touch sensor area on the L earphone for about 1 second during playback and release your finger once you hear a beep.
The previous track or beginning of the current track will be played after the playback of the current track has ended.

Turning on/off Bass Boost

Tap the touch sensor area on the R earphone 3 times quickly.

The music will return to the original volume when a user quits the ambient sound function. If you have raised the volume while listening to surrounding sounds, take note that the volume will increase when you return to music playback.

When listening to surrounding sounds, close the USB cover completely.

The Touch & Talk function draws surrounding sounds from the built-in microphone installed at the R side of the System. Touching the microphone hole allows you to hear surrounding sounds. Take note not to touch or cover the microphone hole accidentally when operating the earphone.

Mic_hole_AE1W + Mic hole AE1W

Microphone hole

The Touch & Talk function draws surrounding sounds from the built-in microphone installed at the R side of the System and plays back the sounds from the L and R sides of the System. As sounds from the right side are emphasized, take note of the direction of the sound when using this function.

The Touch & Talk function can only be used when the System is connected to a BLUETOOTH device. When the System is disconnected from the BLUETOOTH device, the function to hear surrounding sounds is automatically disabled.

When the remaining battery power becomes low, you will hear a beeping sound.

The bass boost setting is stored even if the power is turned off.

When watching movies with the earphones, a slight time lag may occur in the audio output.

We do not guarantee all operations of the BLUETOOTH device.