Wi-Fi Capabilities

You can check the image on the camera via direct 1-to-1 connection (Wi-Fi Direct) with a smartphone (or computer), without the need for an access point (wireless LAN router).
Recording of videos and still images may be performed while monitoring.
(Videos and still images cannot be recorded while monitoring from the computer browser.)

Connect to the smartphone (or PC) via access point at home using the wireless LAN router, to monitor images captured by the camcorder.
Recording of videos and still images may be performed while monitoring.
(Videos and still images cannot be recorded while monitoring from the computer browser.)

You can check the image on the camera via internet connection with a smartphone (or computer) while you are outside.
Recording of videos and still images may be performed while monitoring.
(Videos and still images cannot be recorded while monitoring from the computer browser.)

A still image is automatically captured and sent via e-mail when faces or movements are detected by the camera.
You can also set to record videos on the camera during detection.

Videos of up to 15 seconds can be recorded and sent via e-mail.

Connect this unit to the DLNA compatible TV via access point at hope using the wireless LAN router.

Save all the videos and still images that have not backed up to your computer, which is connected via wireless network. The management file is saved as well.

You can record the location information of the venue where recording is taking place via direct connection (Wi-Fi Direct) with a smartphone supporting the GPS function.
The recorded location information can be used on the software provided with this unit.

Panning operation (changing the camera to the left/right direction) can be remotely controlled via smartphone by setting the camera on the pan cradle (sold separately).

For how to connect the pan cradle, efer to the instruction manual of the Pan Cradle for further details.