Using the Pan Cradle (Sold Separately)

Panning operation (moving the camera to the left/right, horizontal direction) can be controlled via smartphone by setting the camera on the pan cradle.

To use a pan cradle, change the setting of “AV TERMINAL” in advance. Change the setting from the menu screen of the camera.

Changing the setting of the AV terminal.

By default, the AV terminal is set to “AV”. To use a pan cradle, change the setting as described in the following steps.

Tap “MENU”.
(Operation on this camera)

Tap MENU

Tap “CONNECTION SETTINGS”.

C3B_TOP_MENU(Wi-Fi)

Tap “AV TERMINAL”.

C3_AV TERMINAL

Tap “PAN CRADLE”.

C3_AV TERMINAL PAN CRADLE

Tap batsu to exit the setting screen.

Setting the camera to the pan cradle.

For how to connect the pan cradle and the camera, refer to the instruction manual of the pan cradle for further details.

Set the camera to the pan cradle.

C3B_Pan cradle set

For how to connect the pan cradle and the camera, refer to the instruction manual of the pan cradle for further details.

Set the power of the pan cradle to “ON”.

Pan cradle set2

Wait until the pan cradle stops the rotation.

C3B_Pan cradle set3

When the power is turned ON, pan cradle moves to the left/right to adjust the position.

Operations from the smartphone application

Connect the camera and the smartphone via DIRECT MONITORING or INDOOR MONITORING/OUTDOOR MONITORING.

Image Monitoring via Direct Connection (DIRECT MONITORING)
Image Monitoring via an Access Point at Home (INDOOR MONITORING)
Image Monitoring via the Internet (OUTDOOR MONITORING)

Start “Everio sync. 2”.

C2-WiFi_SP_Appli Icon

Start the application after confirming that the smartphone is connected to this camera.

Tap the connection method.

Everio Sync.2-1

Tap LEFT / RIGHT to perform the panning operation.

Appli Android Pan

Memo

Speed of the panning operation can be set in two steps.

Changing the Panning Speed