Main Page ＞
Copying ＞ Creating Discs with a BD Writer (External Blu-ray Drive) ＞ Preparing a BD Writer (External Blu-ray Drive)
Copying |
Preparing a BD Writer (External Blu-ray Drive) |
Memo
- Part number*: QAM0852-001 Mini-A (Male) – A (Female)
*Consult your nearest service center.
To use the USB cable provided with the BD writer (external Blu-ray drive), purchase the following USB conversion cable.
- 1
- 2
- 3
- 4
Remove the AC adapter and battery pack from this unit.
Connect the USB cable and the AC adapter.
Connect the USB cable of the BD writer (external Blu-ray drive) to this unit.
The USB cable provided with this unit cannot be used.
Connect the AC adapter of the BD writer (external Blu-ray drive).
Turn on the BD writer (external Blu-ray drive).
Connect the AC adapter to this unit.
Refer also to the instruction manual of the BD writer (external Blu-ray drive).
Open the LCD monitor.
This unit turns on and the “BACK-UP” menu appears.
While the USB cable is connected, the “BACK-UP” menu is displayed.
Insert a new disc.
Press the eject button to open the disc tray.
Load a new disc properly.
Press the eject button to close the disc tray.
Caution
- Be sure to turn off the power when connecting the devices.
Otherwise, electric shocks or malfunctions may occur. - Do not connect the AC adapter provided with this unit to the BD writer.
- Do not connect the AC adapter provided with the BD writer to this unit.