-
- Copying
- Copying to Windows PC
-
Installing the Provided Software (Built-in)
- Dubbing Files to a Disc by Connecting to a Blu-ray Recorder
- Copying Files to an SD Card
- Copying to Windows PC
- Verifying System Requirements (Guideline)
- Installing the Provided Software (Built-in)
- Backing Up All Files
- Organizing Files
- Recording Videos to Discs
- Backing Up Files Without Using Provided Software
- List of Files and Folders
- Copying to Mac Computer
Installing the Provided Software (Built-in)
You can display the recorded images in calendar format and perform editing using the provided software.
This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first.
Preparations
Connect this unit to a computer with a USB cable.
Windows 10
Open the terminal cover.
Connect to your PC using the provided USB cable.
Before connecting the cable, close the LCD monitor to turn off this unit.
![C4B5 PC connect](fig/C4B5 PC connect_GFNFILlofyhyyu.png)
Open the LCD monitor.
![C4B5 Monitor Open](fig/C4B5 Monitor Open_GFNFILtowwebdl.png)
This unit turns on and the “SELECT DEVICE” menu appears.
Tap “CONNECT TO PC”.
![C5B CONNECT TO PC](fig/C5B CONNECT TO PC_UJDCILnvznmokc.png)
Tap “PLAYBACK ON PC”.
![C5B PLAYBACK ON PC](fig/C5B PLAYBACK ON PC_UJDCILhpbsntwq.png)
Disconnect the USB cable to return to the recording or playback screen.
“Everio Software Setup” appears on the computer.
Operations are to be performed on the computer after the screen switches.
Perform the following operations on your computer.
![Windows10 start2 EN](fig/Windows10 start2 EN_UJDCILsqdqyoyy.png)
![Windows10 start3 EN](fig/Windows10 start3 EN_UJDCILvidrvcfy.png)
If a “This PC” icon is shown on desktop, double-click the icon to open “This PC”.
![Windows10 start4 EN](fig/Windows10 start4 EN_IEDGILguqnjeod.png)
![Windows10 start5 EN](fig/Windows10 start5 EN_IEDGILrqgeqdkp.png)
“Software Setup” appears after a while.
Click “Everio MediaBrowser 4”.
![Everio MediaBrowser 4_EN](fig/Everio MediaBrowser 4_EN_UJDCILhyglcqjm.png)
Follow the on-screen instructions to finish the installation.
Click “Finish”.
![Finish_EN](fig/Finish_EN_UJDCILejrtmeqx.png)
Click “Quit”.
![PC_install3-2](fig/PC_install3-2_CMJNILroiiosyn.png)
Installation is complete, and two icons are created on the desktop.
Remove this unit from your PC.
Memo
If “Everio Software Setup” doesn’t appear, double-click “JVCCAM_APP” in “My Computer” or “Computer”, then double-click “install (or Install.exe)”.
If the auto play dialog box appears, select “Open folder to view files” and click “OK”. Then, click “install (or Install.exe)” in the folder.
Windows 8/Windows 8.1
Open the terminal cover.
Connect to your PC using the provided USB cable.
Before connecting the cable, close the LCD monitor to turn off this unit.
![C4B5 PC connect](fig/C4B5 PC connect_GFNFILlofyhyyu.png)
Open the LCD monitor.
![C4B5 Monitor Open](fig/C4B5 Monitor Open_GFNFILtowwebdl.png)
This unit turns on and the “SELECT DEVICE” menu appears.
Tap “CONNECT TO PC”.
![C5B CONNECT TO PC](fig/C5B CONNECT TO PC_UJDCILnvznmokc.png)
Tap “PLAYBACK ON PC”.
![C5B PLAYBACK ON PC](fig/C5B PLAYBACK ON PC_UJDCILhpbsntwq.png)
Disconnect the USB cable to return to the recording or playback screen.
“Everio Software Setup” appears on the computer.
Operations are to be performed on the computer after the screen switches.
Perform the following operations on your computer.
(For Windows 8) Click the “Search” charm.
(For Windows 8.1) Click
![Icon arrow-down](fig/Icon arrow-down_CMJNILyqhdqtpa.png)
![Windows8 start_EN](fig/Windows8 start_EN_UJDCILvexvitwe.png)
![Windows8 start4_EN](fig/Windows8 start4_EN_UJDCILceyywuif.png)
If a “Computer” icon is shown on desktop, double-click the icon to open “Computer”.
![Windows8 start5_EN](fig/Windows8 start5_EN_UJDCILitumaslu.png)
![Windows8 start6_EN](fig/Windows8 start6_EN_UJDCILykenmogw.png)
“Software Setup” appears after a while.
Click “Everio MediaBrowser 4”.
![Everio MediaBrowser 4_EN](fig/Everio MediaBrowser 4_EN_UJDCILhyglcqjm.png)
Follow the on-screen instructions to finish the installation.
Click “Finish”.
![Finish_EN](fig/Finish_EN_UJDCILejrtmeqx.png)
Click “Quit”.
![PC_install3-2](fig/PC_install3-2_CMJNILroiiosyn.png)
Installation is complete, and two icons are created on the desktop.
Remove this unit from your PC.
Memo
If “Everio Software Setup” doesn’t appear, double-click “JVCCAM_APP” in “My Computer” or “Computer”, then double-click “install (or Install.exe)”.
If the auto play dialog box appears, select “Open folder to view files” and click “OK”. Then, click “install (or Install.exe)” in the folder.
Windows 7
Open the terminal cover.
Connect to your PC using the provided USB cable.
Before connecting the cable, close the LCD monitor to turn off this unit.
![C4B5 PC connect](fig/C4B5 PC connect_GFNFILlofyhyyu.png)
Open the LCD monitor.
![C4B5 Monitor Open](fig/C4B5 Monitor Open_GFNFILtowwebdl.png)
This unit turns on and the “SELECT DEVICE” menu appears.
Tap “CONNECT TO PC”.
![C5B CONNECT TO PC](fig/C5B CONNECT TO PC_UJDCILnvznmokc.png)
Tap “PLAYBACK ON PC”.
![C5B PLAYBACK ON PC](fig/C5B PLAYBACK ON PC_UJDCILhpbsntwq.png)
“Everio Software Setup” appears on the computer.
Operations are to be performed on the computer after the screen switches.
Perform the following operations on your computer.
![User_account_EN](fig/User_account_EN_UJDCILspmnemlm.png)
“Software Setup” appears after a while.
If it doesn’t appear, double-click “JVCCAM_APP” in “Computer” or “My Computer”, then double-click “install.exe”.
Click “Everio MediaBrowser 4”.
![Everio MediaBrowser 4_EN](fig/Everio MediaBrowser 4_EN_UJDCILhyglcqjm.png)
Follow the on-screen instructions to finish the installation.
Click “Finish”.
![Finish_EN](fig/Finish_EN_UJDCILejrtmeqx.png)
Click “Quit”.
![PC_install3-2](fig/PC_install3-2_CMJNILroiiosyn.png)
Installation is complete, and two icons are created on the desktop.
Remove this unit from your PC.
Memo
If “Everio Software Setup” doesn’t appear, double-click “JVCCAM_APP” in “My Computer” or “Computer”, then double-click “install (or Install.exe)”.
If the auto play dialog box appears, select “Open folder to view files” and click “OK”. Then, click “install (or Install.exe)” in the folder.