Backing Up Files Without Using Provided Software

Copy the files to a computer using the following method.

This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first.

Open the terminal cover.

Connect to your PC using the provided USB cable.

Before connecting the cable, close the LCD monitor to turn off this unit.

C4B5 PC connect

Open the LCD monitor.

C4B5 Monitor Open

This unit turns on and the “SELECT DEVICE” menu appears.

Tap “CONNECT TO PC”.

C5B CONNECT TO PC

Tap “PLAYBACK ON PC”.

C5B PLAYBACK ON PC

Disconnect the USB cable to return to the recording or playback screen.

Close the Everio MediaBrowser 4 program, if it starts.

The following screen is displayed after the camera operation is completed.

PLAYBACK ON PC_2

Operations are to be performed on the computer after the screen switches.

(Windows 10)
Click “This PC” in “Windows System”, then click the “JVCCAM_MEM” or “JVCCAM_SD” icon of “This PC”.
(Windows 8)
Right-click “Computer” in the “Windows System Tool” menu to select the checkbox, and then click the “JVCCAM_MEM” or “JVCCAM_SD” icon.
(Windows 7)
Select “Computer” from the “Start” menu, then click on the “JVCCAM_MEM” or “JVCCAM_SD” icon.

Open the folder with the desired files.

Copy the files to any folder in the computer (desktop, etc).

Caution

When the camera and PC are connected by an USB cable, recorded media are read-only.

Memo

To edit/view the files, use a software that supports AVCHD (video)/JPEG (still image) files.

The above operations on computer may vary with the system used.

Disconnecting this Unit from Computer

Safely Remove Hardware (USB)

Click “Safely Remove Hardware and Eject Media”.

Click all “JVCCAM~”.

Disconnect the USB cable and close the LCD monitor.